00198610-01_VD_712.0_R18-2_DE_EN.pdf - 第32页
Station Software 71 2.0 (R18 - 2) / Versio n Description 11/2018 Edition 32 8 Corrected Error s 71 2.0 Station Software The 71 2. 0 stati on software version co ntains all error correct ions of the previous 7 xx versions…
Station Software 712.0 (R18-2) / Version Description 11/2018 Edition
31
7 Restrictions
For details concerning possible machine configurations, please consult the latest version of the
machine specification.
Restrictions to features in previous versions can be found in the Station Software V7xx Feature
Description, item no. [00197741-xx].
Station Software 712.0 (R18-2) / Version Description 11/2018 Edition
32
8 Corrected Errors
712.0 Station Software
The 712.0 station software version contains all error corrections of the previous 7xx versions.
Additionally, the following errors have been corrected in this version:
Error no. Error description
D1-142591801 An incorrect conveyor width was set after reboot.
D1-145486748 Various conveyor errors.
D1-146654832 During the height reference run, a nozzle was expected that was missing. The
nozzle could not be provided at the current activity level.
D1-148088101 The CPP placement head removed a component that was already placed by
the Twin VHF placement head.
D1-148126901 Width adjustment was performed during running production on a SIPLACE
TX2i placement machine.
D1-149428701 Night run with cyclic board transport stopped: disturbed CAN communication,
channel 1. Error message Placement status is unknown: Gantry 1,
Segment 1
was displayed.
D1-152642401 The Tray view automatically jumped to level 1 after the WPTC was confirmed.
D1-152854501 The conveyor did not function during machine endurance run.
D1-153279801 The stations within one line displayed different states (productive/blocked).
D1-153508601 Errors could not be selected in the error statistics view.
D1-154092217 Undefined hardware error after downloading Application 1; 5 DP axes without
Application 1.
D1-154781809 Stop threshold = 0 was ignored.
D1-155009601 At error 33263 Connection between GigE interface card in the
PC and the camera interrupted (252), the GUI did not display which
camera or gantry was affected.
D1-155170101 Glass plate with fiducials could not be calibrated with the SST47 board
camera.
D1-155523201 X4 S placement machine: FCCS digital – in PA1, the stop position of the tray
had a 5 cm back shift. The fiducials could not be recognized.
D1-155597201 Location 2 could not be approached by position correction.
D1-155619501 Stopping the production took too long.
D1-156262534 The software hung up and the module had to be restarted.
D1-156809701 The machine stopped during the 2h run (first board) after about 4 minutes
without any error message.
Station Software 712.0 (R18-2) / Version Description 11/2018 Edition
33
D1-157648601 After the table was removed and inserted, the feeder speed of the Xi Feeder
changed automatically.
D1-158062753 Extended Vision dump file was not stored.
D1-158064501 After starting the FCCS, the gantry never moved to the FCCS plate to start the
calibration.
D1-158433701 The Leveling assistant could not be performed.
D1-158465849 Leveling assistant error.
D1-159122707 The ACT measurements were not successful, because the distance check
failed.
D18495-4001 The XML file generated by Traceability had the wrong start time.
Table 8-1: Corrected errors station software version 712.0
711.1 SP2
Error no. Error description
D1-155313201 When a new job was downloaded all the feeder signals were off.
D1-157668741 eSW: Error message 30470 Either collision of two gantries or
axis hit bumper at end of driving range
.
D1-157715301 When trying to inspect a placement position, no image was displayed.
D1-157719277 A splice was not detected.
D1-157830601
D1-157926708
eSW: Error when checking the motor current for width adjustment.
D1-157851214
D1-158056019
eSW: Sporadically, the error messages 30399 Table 1: Unexpected
reboot from subsystem detected or 34921 Feeder: Input
voltage too low
were displayed.
D17819-36801
D18551-2301
D18495-4701
D18526-6601
D1-58354825
After some days of production, teaching components or opening dump files
got very slow.
D18093-37005 The whispered data did not fit to the board.
Table 8-2: Corrected errors station software version 711.1 SP2