00198610-01_VD_712.0_R18-2_DE_EN.pdf - 第37页
Station Software 71 2.0 (R18 - 2) / Versio n Description 11/2018 Edition 37 9 Important Term s and Abbreviations CA4 CA4 V2 Machine type of the Chip Assembly (CA) - series with 4 gantr ies and 2 PAs C&P Collect &…
Station Software 712.0 (R18-2) / Version Description 11/2018 Edition
36
711.1 Patch 2
Error no. Error description
D1-147902801
D1-151728101
eSW: the machine stopped during dry run with cyclic transport with the error
message
unknown placement state
.
D1-150565001
D1-153597901
D1-150820801
D1-153597901
After an eSW download we always got the information that heads had been
changed.
D1-150590901 Sporadically, the station software stopped during placement with the error
message
30016 Unhandled exception error
.
D1-153569301 For an alternative component shape, the dimensions of the original shape
were used. Thus, this function could not be used if the alternative shape had
different dimensions.
D1-153862701 Teaching of the component position did not always work.
D1-154709901
D1-154855101
The conveyor fiducials were checked after every board.
D18460-15207 Machine picked up 2 large components with the TH. The components
collided when being rotated.
D18537-2101 When a barcode was whispered to the next machine, a tabulator was
replaced by a space character.
Table 8-4: Corrected errors station software version 711.1 Patch 2
711.1 Patch 1
Error no. Error description
D1-127453301 E by SIPLACE, eSW: the feeders were in an undefined state after a restart of
the machine.
D1-151650901 The height for the CPP head within a TX2 V2 machine was wrong when the
CPP head was mounted in a low position.
D1-152039901 The WPC was not displayed correctly in the main view of the GUI.
D18581-2801 The machine stopped after 80 vision errors, although the repick count was set
to 100.
Table 8-5: Corrected errors station software version 711.1 Patch 1
Station Software 712.0 (R18-2) / Version Description 11/2018 Edition
37
9 Important Terms and Abbreviations
CA4
CA4 V2
Machine type of the Chip Assembly (CA)-series with 4 gantries
and 2 PAs
C&P Collect & Place
CPP Collect & Place & Pick & Place
DC Dual Conveyor
DX1/DX2 Machine type with 1 or 2 gantries and 1 PA
EDIF Electronic Design Interchange Format
eWLP embedded Wafer Level Process
FOPLP Fan-Out Panel Level Packaging
FCCS Field Camera Calibration System
GUI Graphical User Interface
HFH High Force Head
HW Hardware
MGCU Modular Gantry Control Unit
MHCU Modular Head Control Unit
MTC Matrix Tray Changer
OIS Operator Information System
PA Processing area
PCB Printed circuit board
Placement mode:
2-in-1
When a machine runs in I-Placement mode, it is possible to
perform manual operations for one side / gantry. This placement
mode is also called "independent".
Placement mode:
Alternating
Placement mode in a dual gantry placement area, in which both
gantries place components on both boards in a dual conveyor.
First, both gantries place all assigned components on the board
in lane one and then on the board in lane two.
Placement mode:
Borrow
Performance
A line runs in I-Placement mode and to get a balanced
throughput between the left and right conveyor lanes, e.g. the
last machine runs in Alternating mode and places components in
this placement area on the board of the other lane.
Placement mode:
I-Placement
Placement mode in a dual gantry placement area in which each
gantry only places components on the board of the assigned
conveyor lane.
SC Single Conveyor
SC SIPLACE Setup Center (external setup control system)
SW Software
SWS SIPLACE Wafer System
SX1/SX2 Machine type with 1 or 2 gantries and 1 PA
TH Twin Head
TH HF Twin Head High Force
Station Software 712.0 (R18-2) / Version Description 11/2018 Edition
38
Twin VHF Very High Force Twin Head
TX1/TX2/TX2i Machine type with 1 or 2 gantries and 1 PA
TX1/TX2 V2
TX2i V2
Machine type with 1 or 2 gantries and 1 PA
TX2 micron/
TX2i micron
TX2i micron 15 µm
Machine type with 2 gantries and 1 PA
VC Vision computer
VCU Vision Control Unit
VHF P&P Very High Force Pick&Place
WLFO Wafer Level Fan-Out, Chip Assembly process
WPC Waffle Pack Changer
X2/X2 S Machine type with 2 gantries and 2 PAs
X3/X3 S Machine types with 3 gantries and 2 PAs
X4/X4 S/
X4 S micron
Machine types with 4 gantries and 2 PAs
X4i/X4i S
X4i S micron
Machine types with 4 gantries and 2 PAs