00198610-01_VD_712.0_R18-2_DE_EN.pdf - 第34页

Station Software 71 2.0 (R18 - 2) / Versio n Description 11/2018 Edition 34 711.1 SP1 Error no. Error description D1 - 140512109 Automatic program do wnload via barco de: machine needed to be emptied when using smart pin…

Station Software 712.0 (R18-2) / Version Description 11/2018 Edition

D1-157648601 After the table was removed and inserted, the feeder speed of the Xi Feeder

changed automatically.

D1-158062753 Extended Vision dump file was not stored.

D1-158064501 After starting the FCCS, the gantry never moved to the FCCS plate to start the

calibration.

D1-158433701 The Leveling assistant could not be performed.

D1-158465849 Leveling assistant error.

D1-159122707 The ACT measurements were not successful, because the distance check

failed.

D18495-4001 The XML file generated by Traceability had the wrong start time.

Table 8-1: Corrected errors station software version 712.0

711.1 SP2

Error no. Error description

D1-155313201 When a new job was downloaded all the feeder signals were off.

D1-157668741 eSW: Error message 30470 Either collision of two gantries or

axis hit bumper at end of driving range

D1-157715301 When trying to inspect a placement position, no image was displayed.

D1-157719277 A splice was not detected.

D1-157830601

D1-157926708

eSW: Error when checking the motor current for width adjustment.

D1-157851214

D1-158056019

eSW: Sporadically, the error messages 30399 Table 1: Unexpected

reboot from subsystem detected or 34921 Feeder: Input

voltage too low

were displayed.

D17819-36801

D18551-2301

D18495-4701

D18526-6601

D1-58354825

After some days of production, teaching components or opening dump files

got very slow.

D18093-37005 The whispered data did not fit to the board.

Table 8-2: Corrected errors station software version 711.1 SP2

Station Software 712.0 (R18-2) / Version Description 11/2018 Edition

711.1 SP1

Error no. Error description

D1-140512109 Automatic program download via barcode: machine needed to be emptied

when using smart pins although the pins were in the same position in both

programs.

D1-144918301 The binder of the linear feeder did not open at the first pickup event.

D1-145486749 eSW: conveyor error messages 30007 Cannot open file and 35336 An

unknown conveyor control unit has been detected after machine

start.

D1-149326501 During production, there was a message that the "Application has to be

closed.

D1-150606549 In case of contactless pickup, the z height was not re-taught, and the feeder

pocket was not measured again after a foil torn.

D1-150924808 Improvement of the manual Pin 1 check to be able to recognize low-contrast

structures.

D1-151189122 eSW: Vacuum for vacuum tooling was not turned on automatically during

recovery placement mode.

D1-151304001

D1-151342257

D1-152045605

After having continued the mapping after a Vision error the mapping

component was lost, and the mapping could not be finished.

D1-151804201 In the Feeder Parameter view, the information "spacer is needed" was

displayed for components with contactless pick-up although current feeders

did no longer need a spacer.

D1-152045605 It was not possible to teach a pickup offset of more than 1 mm for a WPC tray.

D1-152513701 Picking up from 2 special feeders with undefined busy time led to performance

loss as the feeders did not answer quick enough.

D1-152745201

D1-153297807

D1-153360401

D1-154070049

Sporadic problems during the benchmark placement (SX2 with TH).

D1-152748201 Virtual PCB stack: a multi panel board could not be placed.

D1-152854543 After having moved to the nozzle changer position on location 2 in the teach

menu, the software stopped, and the machine had to be switched off.

D1-153217601 37800 [Twin Head, gantry 1] Machine stopped due to too many

repetitive errors.

D1-153325901 PPW 1_L could not be calibrated.

D1-153333101 TX2 V2 with CPP/C&P20 P2 (nozzle changer for CPP is 3.65 mm lower):

there was a warning during calibration of the nozzle changer that the 3 mm

border was exceeded.

D1-153360489 The virtual keyboard was in the background of the input window of the bug

reporter.

D1-153368126 Error message 32507 Product change: Finishing previous

product prior to setup change and no more boards got into the

machine.

D1-153466646 When adjusting the pickup offset, the gantry was moving 300 mm towards the

conveyor instead of going to the pickup position of the WPC.

Station Software 712.0 (R18-2) / Version Description 11/2018 Edition

D1-153552201 There was a problem when synchronizing SMEMA and whispering data

between adjacent machines.

D1-153630802 Error message 30450 Unspecified hardware error was displayed for

each camera but there was no problem at the machine.

D1-153875301 eSW: there was a problem with the transition between the SIPLACE and

AYSY conveyors.

D1-153989601 Changing the conveyor width led to error message Unexpected software

malfunction - the application has to be closed

D1-154055101 The firmware update for the C&P20 pressure regulator could not be done.

D1-154075385 After having downloaded the conveyor BIOS, the subsystem could not be

activated.

D1-154379501 The service symbol was not active after the machine started.

D1-154598802 In stand-alone mode, old jobs could not be deleted any longer.

D1-154781809 Threshold = 0 had no effect: the machine stopped although no threshold was

defined within Setup Center.

D1-155170101 The fiducial plate position of the SST47 could not be calibrated.

D1-155177302 The machine reported a yellow board with an unknown placement state, but

this position could not be checked within the manual operations because just a

grey field was displayed.

D1-155243901 The calibration of the offset between SST47 and SST34 failed.

D1-155371401 Sporadically, the station software stopped during placement with error

message

32602 The software has stopped unexpectedly

D18199-16132 Better handling within the station software for the selection of component

shapes that shall be taught.

D18272-5888 eSW: A 440 mm board did not reach the placement area in an X4 S

placement machine with short input conveyor.

D18445-3801 Sporadically, the station software stopped during placement with error

message

32602 The software has stopped unexpectedly

D18459-1601 The machine displayed an X-axis error 30341: Position is out of

range

D18474-3601 Special FFI feeder brought error message 40007 out of components

although feeder was filled up with 1200 components.

D18505-3253 Sometimes component teaching slowed down the computer.

D18541-2515 Chuck fiducials CA4: If the vacuum tooling fiducials were not used for

recalibration, a dual gantry measurement must be done.

D18570-1501 The machine stopped during placement without error message.

D18585-2817 Moving a gantry to service position did not work and the error message

32535

Checking nozzle configuration: CPP Head, gantry1 was

displayed.

Table 8-3: Corrected errors station software version 711.1 SP1