DEK高级培训资料.pdf - 第166页
• Carried out in diagnostics • Entered in Set Prefers • Saved to configuration file (config.cfg) Board Stop X offset Issue 2: July 2007 file (config.cfg) • Carried out when a camera is replaced • Distance measured from c…
Reference print height
•
Set in diagnostics
•
Saved to configuration
file (config.cfg)
•
Rising table position to
Print Height
Issue 2: July 2007
Reference print height
Home position
•
Rising table position to
place board in contact
with stencil for printing.
Note: Set without board,
then when printing,
board thickness is
taken into account….
•
Carried out in
diagnostics
•
Entered in Set Prefers
•
Saved to configuration
file (config.cfg)
Board Stop X offset
Issue 2: July 2007
file (config.cfg)
•
Carried out when a
camera is replaced
•
Distance measured
from centre of optics to
board stop assembly ...
•
Set in diagnostics
•
Saved to configuration
file (config.cfg)
•
Point from which all
Camera Reference
Issue 2: July 2007
•
Point from which all
camera positions are
measured ...