Horizon Generic Tooling.pdf - 第28页

MACHI NE PROG RAMMI NG STAGE 5 D - MULTIFLE X TOOLING 1.44 User Manual 22. T he M ultiFl ex tooling ca n now be fitted in to the appropri ate location hol es in the tooli ng plate. Ensure that the tooli ng is placed into…

100%1 / 51
MACHINE PROGRAMMING
STAGE 5D - MULTIFLEX TOOLING
User Manual 1.43
14. Select Adjust (F1).
15. Use the Next and Previous keys (F4 - F5) to highlight each parameter.
16. Use the Incr. and Decr. keys (F6 - F7), or the forward slash key (/) on the
keyboard, to change the parameter value.
17. Select Save (F2). The message ‘Saving fiducial data - Please wait Board
data file saved’ is displayed.
18. Select Exit (F8).
19. Select Full Width (F5). The message ‘Checking for a board on the belts’
is displayed. Whilst the rear rail is moving the message ‘Rail moving...’ is
displayed.
20. Select Open Cover (F2).
21. Either:
a. Open the front printhead cover.
or
b. Raise the printhead shutter.
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Generic
Tool ing
Exit
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Generic
Tool ing
Exit
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Board
Width
Load
Width
Generic
Tool ing
Exit
MACHINE PROGRAMMING
STAGE 5D - MULTIFLEX TOOLING
1.44 User Manual
22. The MultiFlex tooling can now be fitted into the appropriate location holes in
the tooling plate. Ensure that the tooling is placed into the correct set of
holes, taking regard of the type of stencil being used and hence the position
of the fixed rail.
23. Either:
a. Close the front printhead cover.
or
b. Raise the drop down panel and lower the printhead shutter.
24. Press the System button.
25. Select Board Width (F5). The message ‘Checking for a board on the
belts’ is displayed. Whilst the rear rail is moving the message ‘Rail
moving...’ is displayed.
26. Select Generic Tooling (F7). The print carriage moves to the front of the
machine.
The following window and menu bar is displayed:
NOTE
If contaminated squeegees are fitted, these should be replaced at this point.
27. Select Continue (F1). Cleaner moves to the Home position and the print
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Board
Width
Load
Width
Generic
Tool ing
Exit
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Generic
Tooling
Exit
Generic Tooling Warning
WARNING Paste may drip into the machine
Remove Squeegees NOW
Continue
Open
Cover
Exit
MACHINE PROGRAMMING
STAGE 5D - MULTIFLEX TOOLING
User Manual 1.45
carriage moves to the rear of the machine. The message ‘Table at Home
Height’ is displayed.
28. Select Transprt Height (F3). The message ‘Table at Transport Height’ is
displayed.
29. Place a board on the input sensor of the upline conveyor of the machine.
30. Select Load (F1).
31. Select Auto Board (F1).
32. Select Vision Height (F3). The message ‘Table at Vision Height. Check
Tooling Clearance’ is displayed.
33. Select Contact Height (F3).
The following window and menu bar is displayed:
34. Select Continue (F1). The message ‘Table at Contact Height. Check
Tooling Clearance’ is displayed.
Continue
Open
Cover
Exit
Load
Transprt
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
Load
Vision
Height
Home
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
Auto
Board
Manual
Board
Unload
Vision
Height
Home
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
Contact
Height
Tra nsp r t
Height
Change
Screen
Open
Cover
Exit
Contact Height Warning
WARNING Check for obstructions between
the Rails and the Screen
Continue
Open
Cover
Exit
Continue
Open
Cover
Exit