00197674-01-UM-E-Series-EN-05-2015.pdf - 第151页
User manual SIPLACE E 3 Technical data and assemblies From software version SC 708.0 05/2015 Edition 3.9 Alternative S IPLACE E feeder modules 151 3.9.2 Safety instruct ions for the SIPLACE StickFeeder E 3 3.9.3 Technica…
3 Technical data and assemblies User manual SIPLACE E
3.9 Alternative SIPLACE E feeder modules From software version SC 708.0 05/2015 Edition
150
3.9 Alternative SIPLACE E feeder modules
3.9.1 SIPLACE StickFeeder E
Item no. 00288207-xx SIPLACE StickFeeder E
The SIPLACE StickFeeder E for SIPLACE E can be used on any SIPLACE E feeder table and
can setup any number of stick / tube, with a combined stick width up to 100mm. The StickFeeder
for SIPLACE E will occupy 10 tracks on the feeder table.
3
Fig. 3.9 - 1 SIPLACE StickFeeder E
(1) Control panel
(2) Fixing lever
(3) Lower level
(4) Upper level
(5) Pogo-pin interface
(6) Slider guide
(7) Locking latch
(7)
(1)
(2)
(3)
(4)
(5)
(6)
User manual SIPLACE E 3 Technical data and assemblies
From software version SC 708.0 05/2015 Edition 3.9 Alternative SIPLACE E feeder modules
151
3.9.2 Safety instructions for the SIPLACE StickFeeder E
3
3.9.3 Technical data
3
3
3
3
Heavy weight of the SIPLACE StickFeeder E!
The heavy weight of the SIPLACE StickFeeder E (14 kg) could
cause injuries if the module is not handled correctly.
Do not lift or carry the module alone.
Use lifting aids and proper lifting techniques when removing
or replacing.
You might need to enlist the help of a second person.
Length x Height x Width 615 mm x 282 mm x 117 mm
Occupied feeder module locations on table 10
Max. clamping height 25 mm
Max. clamping width
Sticks per module 3
100 mm
e.g. 10 sticks with 10 mm width
Weight 14 kg
Vibrating time Variable setting with SIPLACE Pro
3 Technical data and assemblies User manual SIPLACE E
3.9 Alternative SIPLACE E feeder modules From software version SC 708.0 05/2015 Edition
152
3.9.4 SIPLACE PowerAdaptor E
Item no. 03113102-xx SIPLACE PowerAdaptor E
The SIPLACE PowerAdaptor E provides power to a single feeder for offline setup. This device can
either be put on any flat table or can be attached to SIPLACE Preparation Table E (see Section
6.7 on page 298).
3
Fig. 3.9 - 2 SIPLACE Power Adaptor E
(1) Tape reel holder
(2) Guide profile for guiding feeder modules
(3) Pogo-pin interface
3.9.4.1 Description
The SIPLACE PowerAdaptor E allows SIPLACE SmartFeeder E to be used outside the machine
and setup area. The SIPLACE PowerAdaptor E consists of an aluminum frame with guide profile
for holding and guiding the feeder modules. As with the changeover table, the feeder module is
placed on the guide profile, with the slider guides, and is pushed forwards until the front centering
pin of the feeder module is fully inserted.
(3)
(2)
(1)