00197674-01-UM-E-Series-EN-05-2015.pdf - 第66页
2 Operational safety User manual SIPLACE E 2.2 Warning labels From software version SC 708.0 05/2015 Editio n 66 2.2.9 Warning label on the changeover table 2 Fig. 2.2 - 16 Warning labels on the changeover table In fig. …
User manual SIPLACE E 2 Operational safety
From software version SC 708.0 05/2015 Edition 2.2 Warning labels
65
2.2.8.1 Warning label "Sensitive conveyor sides"
2
Item no. 03110412-01 (1 on each conveyor side and placement area)
Sensitive conveyor sides!
The conveyor sides are highly sensitive and may not be moved
unless the brakes have been released.
Moving the sides without releasing the brakes can cause irrepa
-
rable damage to the conveyor sides.
2 Operational safety User manual SIPLACE E
2.2 Warning labels From software version SC 708.0 05/2015 Edition
66
2.2.9 Warning label on the changeover table
2
Fig. 2.2 - 16 Warning labels on the changeover table
In fig. 2.2 - 16, page 66, hand crushing label, item no. 03118888-01 (1 label on the left side and 1
label on the right side)
Hand crushing
Hand crushing
2
RISK OF HAND CRUSHING!
Lifting and lowering the changeover table can crushing the hands.
Take care when lifting and lowering the changeover table.
Observe the description in Section 4.4 on page 191.
User manual SIPLACE E 2 Operational safety
From software version SC 708.0 05/2015 Edition 2.3 Classification of optical systems
67
2.3 Classification of optical systems
2.3.1 Classification of the whole machine
2
2
2.3.2 Laser classification
The following modules are assigned to laser class 2:
– Component sensor on SIPLACE CP14
2
2.3.3 Classification of camera systems
2
PLEASE NOTE
Modules in laser classes 1 and 1M are not identified.
2
The whole machine when ready for operation is assigned to laser class 1.
The laser classes are determined according to DIN EN 60825-1-2008-05.
2
Laser radiation
Do not look into beam!
Laser Class 2 in accordance with DIN EN 60825-1-2008-05.
PLEASE NOTE
In the integrated camera-illumination-systems high brightness LEDs are used. According
to IEC 62741:2006 they are rated in risk group 1.
Do not look into beam!