00197674-01-UM-E-Series-EN-05-2015.pdf - 第207页
User manual SIPLACE E 5 Working with the machine From software version SC 708.0 05/2015 Edition 5 .6 The user inte rface 207 5.6.1 Status field The status field shows the current machine status, the error wh ich occ urre…
5 Working with the machine User manual SIPLACE E
5.6 The user interface From software version SC 708.0 05/2015 Edition
206
5.6 The user interface
The user interface is divided into the following areas.
The user interface with the "Production" view for the SIPLACE E machine is shown as an exam
-
ple.
5
Fig. 5.6 - 1 User interface components in the "Production state" view (example)
Legend
(1) Status field (status and error display)
(2) View of changed configurations and additional options
(3) Information line
(4) Toolbar
(5) Processing area / display area
(1)
(5)
(4)
(3)
(2)
User manual SIPLACE E 5 Working with the machine
From software version SC 708.0 05/2015 Edition 5.6 The user interface
207
5.6.1 Status field
The status field shows the current machine status, the error which occurred most recently and the
action to be performed (see section 5.7
, page 214).
(Green) Starts the context-sensitive Online Help function for the current view. All operating con
-
trols for the current view are explained
(Red) Starts the help system, showing the possible causes of the current errors and suitable solu
-
tions (see section 5.7.1
, page 215).
Opens a dialog box in which the error source, error message text and the error date with time are
shown (see section 5.7.1
, page 215). The help function for the current error can also be opened
from here.
Deletes the error currently shown from the status field.
5.6.2 Display and processing area
This area shows the buttons for setting/deleting functions, general information about the board,
setup, recipes and other information.
Animated and color-coded items helps explain processes or states (e.g. editing, empty location
etc.).
The "Production" (basic view) view indicates certain operating states (editing, error etc.).
Stop processing. This stops the current processing run.
Continue processing. This starts or continues board placement.
Placement progress
The placement progress is shown for each board on the chart view.
Boards being processed
The board is taken up by the system and placed. The PCB icon will be shown as a dark green
button.
5 Working with the machine User manual SIPLACE E
5.6 The user interface From software version SC 708.0 05/2015 Edition
208
Board processing terminated
If processing is terminated, the PCB icon will be shown in red.
Check the board
If the board is in the output conveyor and the board status needs to be checked by the operator,
the PCB icon will be shown in yellow.
5.6.3 Toolbar
The toolbar contains buttons for the main station software functions.
These enable you to switch the user interface over to other views and to use the functions avail
-
able there (see section 5.6.5
, page 212).
5
Fig. 5.6 - 2 Toolbar
The buttons vary according to your individual configuration and the operator level set. Some views
are only available in higher operator levels.
The following table briefly describes the buttons and main functions.
5
Icon View Description
Production
(main view)
Shows the machine status for the most frequently performed tasks
during production.
Shows the operating states, see section 5.6.2
, page 207.
Shows locations, name of setup, name of recipe, configuration
changes and additional options.
Job editor Opens the Job editor for SIPLACE Station Programming. The job
editor allows the user to perform any edit actions in a job. A job in
SIPLACE Station Programming consist of one or more boards and
a setup.
Only available from operator level Advanced Production.
Job control Opens the Job control for SIPLACE Station Programming.
In the job control dialog you can see which board is being produced;
you can stop/start the production of other boards and select a board
for teaching purposes.
Only available from operator level Advanced Production.
Teach job Opens the Teach job for SIPLACE Station Programming.
The teach job completes the parameterization of elements within
the job.