00197674-01-UM-E-Series-EN-05-2015.pdf - 第20页
1 Introduction User manual SIPLACE E 1.2 Double sided SIPLACE E From software version SC 708.0 05/201 5 Edition 20 1.2.2 SIPLACE E with change over table on location 1 1 Fig. 1.2 - 2 Double sided SIPLACE E placement mach…
User manual SIPLACE E 1 Introduction
From software version SC 708.0 05/2015 Edition 1.2 Double sided SIPLACE E
19
The double sided SIPLACE E placement machines demonstrate
– High precision
– Placement performance up to the high end process range
– A wide ranging component range from 01005 components to a size of 200 mm x 110 mm.
Following placement methods are possible for processing the components:
– Collect&Place and
– Pick&Place
The SIPLACE E placement machine consists one gantry. For an overview of the placement head
configuration, refer to section 3.1.1
from page 99.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
The SIPLACE E machine supports the SIPLACE single conveyor.
There are two locations available for supplying components. One fixed table on location 1 and one
change over table on location 2 with 60 tracks.
1 Introduction User manual SIPLACE E
1.2 Double sided SIPLACE E From software version SC 708.0 05/2015 Edition
20
1.2.2 SIPLACE E with change over table on location 1
1
Fig. 1.2 - 2 Double sided SIPLACE E placement machine with change over table on location 1
(T) Direction of PCB transport
User manual SIPLACE E 1 Introduction
From software version SC 708.0 05/2015 Edition 1.2 Double sided SIPLACE E
21
The double sided SIPLACE E placement machines demonstrate
– High precision
– Placement performance up to the high end process range
– A wide ranging component range from 01005 components to a size of 200 mm x 110 mm.
Following placement methods are possible for processing the components:
– Collect&Place and
– Pick&Place
The SIPLACE E placement machine consists one gantry. For an overview of the placement head
configuration, refer to section 3.1.1
from page 99.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
The SIPLACE E machine supports the SIPLACE single conveyor.
There are two locations available for supplying components.One change over table on location 1
and one change over table on location 2 with 60 tracks.