SM482PLUS_Operation(Eng_Ver2.3).pdf - 第28页
Operation Handbook 3-9 Chap ter 3 This chapter describes the production procedure. Pr oduction Pr eparat ion Fo r Op erati on Ⅱ > Down load th e P CB f ile Preparation F or Operation Ⅱ Step 5. Sel ect ' PCB D/L &…
Operation Handbook
3-8
Chapter 3
This chapter describes the production procedure.
Production
Preparation For Operation Ⅱ > Download the PCB file
Preparation For Operation Ⅱ
Production
Step 3.
Click the 'Open'
ㆍ Click the 'Open'.
Step 4.
Select the PCB file
ㆍ Select the PCB file to work with.t
Operation Handbook
3-9
Chapter 3
This chapter describes the production procedure.
Production
Preparation For Operation Ⅱ > Download the PCB file
Preparation For Operation Ⅱ
Step 5.
Select 'PCB D/L'
The file with extension of .opt is the optimization completed file.
Step 6.
The completion of Download the PCB file
ㆍ The PCB file Download is complete.
Operation Handbook
3-10
Chapter 3
This chapter describes the production procedure.
Production
Preparation For Operation Ⅱ > Adjusting the conveyor width
Preparation For Operation Ⅱ
Production
2. Adjusting the conveyor width
Step 1.
Select the 'PCB Edit' menu
Step 2.
Select the 'Board' submenu