cp742me_pam_operation_manual.pdf - 第12页
Fuji Software Upgrade Report (Appendix) 02022A3 12/21 htt p:/ /www.f uj i. co. jp / Copyright © 2002 Fuji Mac hine Manufacturi ng Co., Ltd. All Right s Reserved. 8. Updating th e Machine Data Press [Maintenanc e] - [PAM …
Fuji Software Upgrade Report (Appendix) 02022A3 11/21
http://www.fuji.co.jp/
Copyright © 2002 Fuji Machine Manufacturing Co., Ltd. All Rights Reserved.
7. Displaying the Distribution
Press [Maintenance] - [PAM Measure] - [100%/80%] - [OK] - [PAM Measure] - [Result] - [Indicate
Distribution] to display the following screen. A measurement results diagram for each nozzle can be
displayed.
Placement distribution screen.
7.1 Changeover of Data Display
The display can be switched to the standard distribution display.
7.2 Changeover of Nozzle Display
The nozzle display can be switched.
7.3 Changeover of Head Display
The placing head display can be switched.
Fuji Software Upgrade Report (Appendix) 02022A3 12/21
http://www.fuji.co.jp/
Copyright © 2002 Fuji Machine Manufacturing Co., Ltd. All Rights Reserved.
8. Updating the Machine Data
Press [Maintenance] - [PAM Measure] - [100%/80%] - [OK] - [PAM Measure] - [Renewal] to display
the following screen. The measurement results can be fed back to the machine data.
Machine data update screen.
8.1 Changeover of Nozzle Display
Press this button to toggle through the nozzles (1 to 6). The necessary data for each nozzle
is also displayed as each change of nozzle is made.
8.2 Update Proper
The measurement results can be fed back to the machine data. Depending on the level of
compensation, the measurement results can be used in full (1/1) or as a half (1/2).
8.3 1/1
Press this button to feed the measurement results back to the machine data as they are.
Fuji Software Upgrade Report (Appendix) 02022A3 13/21
http://www.fuji.co.jp/
Copyright © 2002 Fuji Machine Manufacturing Co., Ltd. All Rights Reserved.
8.4 1/2
Press this button to feed 0.5 of the measurement results back to the machine data.
8.5 Machine Data Format
The format at a cam speed of 80% is detailed below.
Head A X MC0A1POX -10.000
↑↑ ↑ ↑
Head Axes CCIMF name Machine data
CCIMF names for other nozzles display as shown below.
MCO [A – P] [1 – 6] PO [X,Y]
A – P: Head A – P
1 – 6: Nozzle 1 – 6
X, Y: Axes
The format at a cam speed of 100% is detailed below.
Head A X MC0A1POX100 -10.000
↑↑ ↑ ↑
Head Axes CCIMF name Machine data
CCIMF names for other nozzles display as shown below.
MCO [A – P] [1 – 6] PO [X,Y] 100
A – P: Head A – P
1 – 6: Nozzle 1 – 6
X, Y: Axes