cp742me_pam_operation_manual.pdf - 第8页

Fuji Software Upgrade Report (Appendix) 02022A3 8/21 htt p:/ /www.f uj i. co. jp / Copyright © 2002 Fuji Mac hine Manufacturi ng Co., Ltd. All Right s Reserved. 4.5 Renewal The res ults are used to update the m achine da…

Fuji Software Upgrade Report (Appendix) 02022A3 7/21

http://www.fuji.co.jp/

4. Measuring the PAM Placement

Press [Maintenance] - [PAM Measure] - [PAM Measure] - [100%/80%] - [OK] - [PAM Measure] to

display the following screen and enable the START button. Press START to begin the

measurement. The vision monitor displays during the measurement.

PAM placement measurement screen.

4.1 Move Mode

Measurement can be carried out in Continue or Step mode.

4.2 Result

The deviation results for the measurement of PAM part placement are given for each

sequence as 3

σ, 6σ, Max., Min., Cp and Cpk.

4.3 Indicate Distribution

The distribution diagrams of the measurement results display.

4.4 File Save

The results are saved as a file.

The results files are saved at “¥Fuji¥User¥Data” in order with the names “Pam001.Dat” to

“Pam005.Dat”. The format of the files is described later in this document.

Fuji Software Upgrade Report (Appendix) 02022A3 8/21

http://www.fuji.co.jp/

4.5 Renewal

The results are used to update the machine data placement offset items.

4.6 Editing Offset Tolerances

The offset tolerances can be edited.

Fuji Software Upgrade Report (Appendix) 02022A3 9/21

http://www.fuji.co.jp/

5. Displaying the Measurement Results

Press [Maintenance] - [PAM Measure] - [100%/80%] - [OK] - [PAM Measure] - [Result] to display the

following screen. The results for all the measurements display (Avg., 3

σ, 6σ, Max., Min., Cp, Cpk).

Measurement results screen.

5.1 Change Nozzle

The nozzle display can be changed.

5.2 Edit USL/LSL

The data (USL, LSL) can be set for the calculation of Cp and Cpk.

5.3 Show Deviation

The measurement results for each sequence are displayed.