cp742me_pam_operation_manual.pdf - 第7页

Fuji Software Upgrade Report (Appendix) 02022A3 7/21 htt p:/ /www.f uj i. co. jp / Copyright © 2002 Fuji Mac hine Manufacturi ng Co., Ltd. All Right s Reserved. 4. Measuring th e PA M Placement Press [Maintenanc e] - [PA…

Fuji Software Upgrade Report (Appendix) 02022A3 6/21

http://www.fuji.co.jp/

3.5.2 Carrying Out PAM With the Cam Speed at 100% and Updating the

Machine Data

1. From the main screen, press [Maintenance] - [PAM Measure], and then set the

cam speed to 80%.

2. Select [PAM Equip] and START to carry out the placement of the PAM parts.

3. Press [PAM Measure] and START to carry out measurement of the placement

accuracy.

4. Press [Renewal] to update the machine data.

Note: Make sure that the program selected is suitable for production at a cam speed of

100%.

3.5.3 Calibration Data Batch Conversion

Calibration data is batch-converted, including that for non-measured nozzles, when

using [Calib. Data Batch Conv.] command. Calibration data for measured nozzles,

however, is used for those of non-measured nozzles.

[Main] → [Maintenance] → [PAM Measure] → [Cam Speed Selection Dialog] →

[100%]/[80%] → [OK] → [PAM Measure] → [Renewal] → [Update Proper Data]

Screen → [Calib. Data Batch Conv.]

Fuji Software Upgrade Report (Appendix) 02022A3 7/21

http://www.fuji.co.jp/

4. Measuring the PAM Placement

Press [Maintenance] - [PAM Measure] - [PAM Measure] - [100%/80%] - [OK] - [PAM Measure] to

display the following screen and enable the START button. Press START to begin the

measurement. The vision monitor displays during the measurement.

PAM placement measurement screen.

4.1 Move Mode

Measurement can be carried out in Continue or Step mode.

4.2 Result

The deviation results for the measurement of PAM part placement are given for each

sequence as 3

σ, 6σ, Max., Min., Cp and Cpk.

4.3 Indicate Distribution

The distribution diagrams of the measurement results display.

4.4 File Save

The results are saved as a file.

The results files are saved at “¥Fuji¥User¥Data” in order with the names “Pam001.Dat” to

“Pam005.Dat”. The format of the files is described later in this document.

Fuji Software Upgrade Report (Appendix) 02022A3 8/21

http://www.fuji.co.jp/

4.5 Renewal

The results are used to update the machine data placement offset items.

4.6 Editing Offset Tolerances

The offset tolerances can be edited.