MPM全自动印刷机中文操作手册.pdf - 第37页
37 2. T each V ision 做一片 PCB 新程式的 Mark 點 about to enter VISION TEACH operation. ( 即將進入視覺系統設定操作 ) Pr ess NEXT to Continue, or EXIT to Quit. ( 按 NEXT 繼續 , 按 EXIT 離開 ) 你按 NEXT 之後，出現下列訊息： Place a board on input track. ( 請將基板…
36
TEACH is now complete. (程式現在設定完成)
Press SELECT to save now, or(按 SELECT 現在存入檔案)
Press NEXT to continue. (按 NEXT 繼續回主畫面
按 SELECT 之後,出現存入檔案鍵盤畫面
Press NEXT to continue. (按 NEXT 繼續,回主畫面)
37
2.
Teach Vision 做一片 PCB 新程式的 Mark 點
about to enter VISION TEACH operation. (即將進入視覺系統設定操作)
Press NEXT to Continue, or EXIT to Quit. (按 NEXT 繼續, 按 EXIT 離開)
你按 NEXT 之後，出現下列訊息：
Place a board on input track. (請將基板放到軌道輸入端)
Press NEXT to Continue, or EXIT to Quit. (按 NEXT 繼續, 按 EXIT 離開)
about to enter VISION TEACH operation.
Press NEXT to Continue, or EXIT to Quit.
Place a board on input track.
Press NEXT to Continue, or EXIT to Quit.
38
你按 NEXT 之後，出現下列訊息：
ADD or DELETE targets to change the(新增或刪除,所指 Mark 點位置或變更目
current vision layout.前 Mark 點位置)
Press EXIT when you are FINISHED. (當你已完成 Teach vision 按 EXIT)
增加一個 Mark 點
刪除一個 Mark 點
辨視做完的 PC 板與鋼板 Mark 點
將點選到位置放大與縮小
Locating the board…
ADD
DELETE
VIEW
ZOOM IN