MPM全自动印刷机中文操作手册.pdf - 第56页
56 Please define PASTE Deposit Outline. ( 請將印完後 PC 板上錫膏，點取輪廓 ) Press NEXT to alternate between POSITION ( 按 NEXT 選取錫膏點並調整尺 adjust mode and SIZE adjust mode. 寸、大小 ) Press SELECT when DONE. ( 按 SELECT 完成 ) ※選取框為黑色虛線，為選取錫膏點…
55
Press SELECT to continue or EXIT to quit. (按SELECT繼續或EXIT離開)
你按 SELECT 之後，出現下列訊息及視窗：
(按SELECT繼續或EXIT離開)
Jog the crosshair to the desired offset(移動十字線到所要位置)
move position. (按NEXT調整對比，或EXIT完成)
Press NEXT for contrast ON, EXIT to finish.
你按 EXIT 之後，出現下列訊息及視窗：
Jog the crosshair to the desired offset
move position.
Press NEXT for contrast ON, EXIT to finish.
Locating the Board….
Please define PASTE Deposit Outline.
Press NEXT to alternate between POSITION
adjust mode and SIZE adjust mode.
Press SELECT when DONE.
56
Please define PASTE Deposit Outline. (請將印完後PC板上錫膏，點取輪廓)
Press NEXT to alternate between POSITION(按NEXT選取錫膏點並調整尺
adjust mode and SIZE adjust mode. 寸、大小)
Press SELECT when DONE. (按SELECT完成)
※選取框為黑色虛線，為選取錫膏點
你按 EXIT 之後，出現下列訊息及視窗：
Please Define Pad Outline. (請將印完後PC板上PAD點，點取輪廓)
Press NEXT to alternate between POSITION(按NEXT選取錫膏點並調整尺
adjust mode and SIZE adjust mode. 寸、大小)
Press SELECT when DONE. (按SELECT完成)
※ 選取框為紅色虛線，為選取PAD點
File
Please Define Pad Outline.
Press NEXT to alternate between POSITION
adjust mode and SIZE adjust mode.
Press SELECT when DONE.
57
Load File
Save File
Delete File
Backup System
Restore System
File Upload
File Download
Save Timing File
Load File
載入已存入程式檔案
Save File
存入程式檔案
Delete File
刪除程式檔案
Backup System
備份機器內部資料及存入程式檔案
Restore System
恢復備份機器內部資料及存入程式檔案到機器內硬碟
File Upload
將已存入程式檔案存到磁片
File Download
將磁片內檔案回存入機器內硬碟
Save Timing File
將目前程式檔案有關時間參數存入到磁片
1. Load File 載入已存入檔案