MPM全自动印刷机中文操作手册.pdf - 第47页

47 Please DEFINE the END pad of this device. ( 請 P AD 點前後框起來 ) Pr ess NEXT to alter nate between POSITION ( 按 NEXT 調整框位置、尺寸 ) Adjust mode and size adjust mode. Pr ess EXIT when you ar e FINISHED. ( 按 EXIT 完成 ) JOG to the…

選擇 QFP 零件時

Move the trackball pointer to the Area(移動軌跡球,按 SELECT 點選到 PC

Where the device is to be added and 板上 QFP 零件位置)

Press SELECT

按 SELECT 之後,出現下列訊息視窗畫面

JOG to the closest Horizontal end pad. (移動虛線,選擇 QFP 第一點水平

The object should be centered. PAD 點)

Press EXIT when you are FINISHED. (按 EXIT 完成)

Move the trackball pointer to the Area

Where the device is to be added and

Press SELECT

Please DEFINE the END pad of this device.

Press NEXT to alternate between POSITION

Adjust mode and size adjust mode.

Press EXIT when you are FINISHED.

Please DEFINE the END pad of this device. (請 PAD 點前後框起來)

Press NEXT to alternate between POSITION(按 NEXT 調整框位置、尺寸)

Adjust mode and size adjust mode.

Press EXIT when you are FINISHED. (按 EXIT 完成)

JOG to the closest Vertical end pad. (移動虛線,選擇 QFP 第一點垂直

The object should be centered. PAD 點)

Press when you are FINISHED. (按 EXIT 完成)

Please DEFINE the END pad of this device. (將 PAD 點前後框起來)

Press NEXT to alternate between POSITION(按 NEXT 調整框位置、尺寸)

Adjust mode and size adjust mode.

Press EXIT when you are FINISHED. (按 EXIT 完成)

Please DEFINE the END pad of this device.

Press NEXT to alternate between POSITION

Adjust mode and size adjust mode.

Press EXIT when you are FINISHED.

※ 按 EXIT 之後,影像視覺系統自動搜尋 QFP

4. Teach ID

做辨識鋼板身分

※ 當有兩片一樣機種鋼板,一種為有 IC 零件,而另一種無 IC 零件,先做辨識

鋼板身分以防放錯料。

5. Teach Custom BGA

編輯自行設計的 BGA 零件檔案(7.0 版本)

這個軟體能編輯自訂 BGA，這個功能可達到 50 個 X 50 的尺寸，計 2500 個

PAD 點，或單邊最大為 100 個 PAD 點，但是不能超過最大 2500 個 PAD 點。