00194653-0202_UM_Pinolenreinigungsstation_DE EN.pdf - 第19页
Installation and User manual Sleeve cleaning station 10/2007 Edition 19 2.4.3.1 Safety of plant and equipment Never make changes, however mino r , unless you are totally aware of the effect they will have on the overall …
Installation and User manual Sleeve cleaning station
10/2007 Edition
18
2.4 Safety instructions
This User Manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. 2
2.4.1 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of automatic placement systems and add-on devices and
are suitably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
– have received first aid training.
2.4.2 Use as prescribed
The product must only be used for its intended purposes as described in the catalogs and techni-
cal descriptions, namely the placement of SMD components, and only with the third-party equip-
ment and components recommended or permitted by SIPLACE. Use for a different or extended
purpose is not prescribed.
If the product is not used as prescribed, SIPLACE accepts no liability for any damage that may
occur and does not guarantee that the components will work properly and without problems.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
2.4.3 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason any use that is not prescribed is not allowed. If the product is not used
as prescribed, SIPLACE accepts no liability for any damage that may occur and does not guaran-
tee that the components will work properly and without problems.
Failure to use the placement machine as prescribed includes, for example
– the operation of the station without safety cover or with safety cover without function.
– the cleaning of sleeves with ddifferent length of shafts.
Installation and User manual Sleeve cleaning station
10/2007 Edition
19
2.4.3.1 Safety of plant and equipment
Never make changes, however minor, unless you are totally aware of the effect they will have on
the overall functioning of the system. 2
The stations must always be set up, retooled and maintained by appropriately trained personnel.2
Only use SIPLACE original spare parts and authorized accessories. The use of other parts will
affect safety and will invalidate the liability for any consequential damage. 2
Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-
breakers or remove safety devices. 2
2.4.4 Definition
2
NOTE 2
2
2
2
Installation and User manual Sleeve cleaning station
10/2007 Edition
20
2.5 Special safety information
2
Read this information before using your sleeve cleaning station. 2
2
2
Changes or modifications to the sleeve cleaning station not expressively approved by SIPLACE
EA may void the standard warranty of the equipment. 2
2.5.1 Product care
– DO NOT expose your product to liquid or moisture
(Humidity range 30 to 80%)
– DO NOT expose your product to extreme high or low temperature
(Temperature range 15 to 35 degrees)
– DO NOT keep your product in an area prone to dust or dirt
2.6 System Specification
2
2
2
2
2
2
2
Dimension (LxWxH) 240mm L × 225mm W × 260mm H
Weight 5.5 kg
Supply voltage 100V ~ 240V AC
Total electrical power 7.5 W
Air Pressure 5 - 7 bar (0.5Mpa ~ 0.7Mpa)
Supported sleeve types
all sleeve types for
6-Nozzle Collect&Place head &
12-Nozzle Collect&Place head
Operating temperature range 15 - 35° C
Operating humidity range 30 - 80%