00194653-0202_UM_Pinolenreinigungsstation_DE EN.pdf - 第20页

Installation and User manual Sleeve cleaning station 10/2007 Edition 20 2.5 S pecial safety information 2 Read this information b efore using your slee ve cleaning st ation. 2 2 2 Changes or modifications to the sleeve c…

100%1 / 30
Installation and User manual Sleeve cleaning station
10/2007 Edition
19
2.4.3.1 Safety of plant and equipment
Never make changes, however minor, unless you are totally aware of the effect they will have on
the overall functioning of the system. 2
The stations must always be set up, retooled and maintained by appropriately trained personnel.2
Only use SIPLACE original spare parts and authorized accessories. The use of other parts will
affect safety and will invalidate the liability for any consequential damage. 2
Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-
breakers or remove safety devices. 2
2.4.4 Definition
2
NOTE 2
2
2
2
Installation and User manual Sleeve cleaning station
10/2007 Edition
20
2.5 Special safety information
2
Read this information before using your sleeve cleaning station. 2
2
2
Changes or modifications to the sleeve cleaning station not expressively approved by SIPLACE
EA may void the standard warranty of the equipment. 2
2.5.1 Product care
– DO NOT expose your product to liquid or moisture
(Humidity range 30 to 80%)
– DO NOT expose your product to extreme high or low temperature
(Temperature range 15 to 35 degrees)
– DO NOT keep your product in an area prone to dust or dirt
2.6 System Specification
2
2
2
2
2
2
2
Dimension (LxWxH) 240mm L × 225mm W × 260mm H
Weight 5.5 kg
Supply voltage 100V ~ 240V AC
Total electrical power 7.5 W
Air Pressure 5 - 7 bar (0.5Mpa ~ 0.7Mpa)
Supported sleeve types
all sleeve types for
6-Nozzle Collect&Place head &
12-Nozzle Collect&Place head
Operating temperature range 15 - 35° C
Operating humidity range 30 - 80%
Installation and User manual Sleeve cleaning station
10/2007 Edition
21
2.7 System components and configuration
2
2
1 Power switch 6 Air filter
2 Start button 7 Sleeve set plate
3 Stop button 8 Upper cover set guide
4 Mode selector (long / short ditch) 9 Upper cover fixing magnet
5 Upper cover 10 Buzzer
a
s
d
f
g
h
j
k
l
;