00198328-01_AI_Basic Pack Vakuum Tooling_TX_DE_EN.pdf - 第38页
38 Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017
37Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017
1 Introduction.. 39
1.1 Safety Instructions.. 39
1.1.1 Conventions for the Use of Safety Instructions and Symbols.. 39
1.1.2 Safety Instructions for Working with Strong Magnetic Fields.. 40
1.1.3 Safety Instructions for the Power Supply (With SMPS).. 40
1.1.4 Safety instructions for the compressed air supply.. 42
1.1.5 Safety Instructions for the Gantry.. 42
1.1.6 Safety Instructions on Hazardous Materials.. 42
1.2 Preparatory Work..... 43
1.3 Other Instructions.. 45
1.3.1 Environmentally-Friendly Disposal of Materials and Components.. 45
1.3.2 Use of Original SIPLACE Accessories and Spare Parts.. 45
1.3.3 ESD Guidelines.. 45
1.3.3.1 Definition of ESD.. 45
1.3.3.2 Important Measures to Protect Against Static Charging.. 45
1.3.3.3 Handling ESD Modules.. 45
1.3.3.4 Measurements and Modifications to ESD Modules.. 46
1.3.3.5 Dispatching ESD Modules.. 46
1.3.4 Validity of Document.. 46
1.3.5 Release History.. 46
1.4 Staff Qualifications and Training.. 47
2 Brief Description.. 49
2.1 Product Description.. 49
2.2 Prerequisites.. 49
2.3 Scope of Delivery.. 50
2.4 Tools and Equipment Required.. 52
2.5 Required Working Time.. 52
3 Installation.. 53
3.1 Preparatory Steps.. 53
3.2 Assembly.. 54
3.3 Final Work.. 57
3.3.1 Settings in the Vacuum Switch.. 59
3.3.1.1 Factory Settings.. 60
3.3.1.2 Setting Switching Point 2 as Normally Open.. 61
3.3.1.3 Setting Switching Point 1.. 62
3.3.1.4 Setting Hysteresis Switching Point 1.. 63
3.3.1.5 Setting Switching Point 2.. 64
3.3.1.6 Setting Hysteresis Switching Point 2.. 65
4 Appendix.. 67
4.1 Excerpts from the Service Manual.. 67
4.2 Circuit Diagrams.. 67
4.3 Cable Overview.. 67
4.3.1 Connectors Location 2.. 67
4.3.2 X34 Connectors Conveyor Control.. 67
4.4 Overview.. 68
38 Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017
1 Introduction
1.1 Safety Instructions
Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017 39
1 Introduction
SIPLACE® TX machines can be equipped with a customer-specific ACT Vacuum Tooling (Soko).
Prerequisite for this is the Basic Pack Vacuum Tooling TX, to ensure the vacuum supply of the
vacuum tooling.
In the case of SIPLACE TX micron 15 μm machines, the Basic Pack Vacuum Tooling TX is in-
stalled by default from the factory. In the case of SIPLACE TX micron 20/25 µm machines, the Ba-
sic Pack Vacuum Tooling TX is not installed by default, but can be retrofitted.
This manual describes the retrofitting of the Basic Pack Vacuum Tooling TX in these machines.
The installation, activation and commissioning of the ACT vacuum toolings (Soko) are described in
the ACT Accuracy Check Tool - SW 7xx [00198363-01_UM_ACT_en - 7xx SW] User Manual.
1.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the Use of Safety Instructions and Symbols
Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► These symbols indicate actions that have to be performed by the operator.