00198328-01_AI_Basic Pack Vakuum Tooling_TX_DE_EN.pdf - 第48页
1 Introduction 1.4 Staff Qualifications and Training 48 Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017
1 Introduction
1.4 Staff Qualifications and Training
Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017 47
1.4 Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.
1 Introduction
1.4 Staff Qualifications and Training
48 Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017
2 Brief Description
2.1 Product Description
Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017 49
2 Brief Description
2.1 Product Description
SIPLACE TX machines from Serial No. TA001 can be retrofitted with a customer-specific Basic
Pack Vacuum Tooling TX.
The Basic Pack Vacuum Tooling TX is a prerequisite for the use of the ACT vacuum tooling.
Mounting Position Basic Pack Vakuum Tooling TX
1.
2.
T
Location 2
Mounting position behind the cover and
below the conveyor unit
Transport direction
2.2 Prerequisites
The following prerequisites are required for the use of an ACT vacuum tooling:
[03149194-xx] Basic Pack Vacuum Tooling TX
[03150062-xx] Screw joint transport stabilization
[03153003-xx] Transport reinforcement TXmicron
[03155026-xx] Optional lifting table tooling for TXmicron 15µm