00198328-01_AI_Basic Pack Vakuum Tooling_TX_DE_EN.pdf - 第65页

3 Installation 3.3 Final Work Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017 65 3.3.1.6 Setting Hysteresis Switching Point 2 Fig.9: Setting hysteresis switching point 2 Proce…

100%1 / 70
3 Installation
3.3 Final Work
64 Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017
3.3.1.5 Setting Switching Point 2
 NOTICE!
Before switching point 2 can be set, the hysteresis point may have to be set first. This
must not be greater than the switching point itself!
.
Fig.8: Setting switching point 2
Proceed as follows to set switching point 2:
► Press the SET button.
► Press the SET button until you see the SP2 (Switching Point 2) menu item.
► Press the MODE button. A value appears on the display. The one point flashes.
► Press the SET button and set a value 0-9.
► Press the MODE button. The tens point flashes.
► Press the SET button and set a value 0-9.
► Press the MODE button. The hundreds point flashes.
► Press the SET button and set a value 0-9.
► The display shall now show 100.
► Wait 2 seconds. SP2 appears on the display again.
► Continue with SET button – please refer to 3.3.1.6 "Setting Hysteresis Switching Point
2" [}65].
3 Installation
3.3 Final Work
Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017 65
3.3.1.6 Setting Hysteresis Switching Point 2
Fig.9: Setting hysteresis switching point 2
Proceed as follows to set hysteresis switching point 2:
► Press the SET button.
► Press the SET button until you see the rP2 (Hysteresis 2) menu item.
► Press the MODE button. A value appears on the display. The one point flashes.
► Press the SET button and set a value 0-9.
► Press the MODE button. The tens point flashes.
► Press the SET button and set a value 0-9.
► Press the MODE button. The hundreds point flashes.
► Press the SET button and set a value 0-9.
► The display shall now show 50.
► Wait 2 seconds. rP2 appears on the display again.
► Quit the menu.
3 Installation
3.3 Final Work
66 Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017