00900160-01_UM_ASM-ProcessLensDualLane_en.pdf - 第13页
2 Safety 2.1 Conventions for the use of safety instructions and symbols Instruction Guide ASM ProcessLens Dual-lane 06/2018 13 2 Safety DANGER Non observance of the following safety instructions may cause injury to perso…
1 Introduction
1.4 Important notes on this Instructor Guide
12 Instruction Guide ASM ProcessLens Dual-lane 06/2018
1.4.4 Revision table
Edition Amendments
06/2018 First edition
1.4.5 Further information about and contents of the documentation package
1.4.5.1 How to get information
If you have any further questions concerning this Instructor Guide or if you would like additional in-
formation on a particular topic, please get in touch with your local ASM SMT Solutions dealer or
contact us directly at:
ASM Assembly Systems Singapore Pte ltd
535 Yishun Industrial Park A
Singapore 768775
1.4.5.2 ASM SMT Solutions on the World Wide Web (WWW)
We also have our own site on the Internet. Log onto our ASM home page at
http://www.asm-smt.com.
All the menus and other information are available in two languages: you can choose between the
German and English versions.
The various headings contain information on:
●
Our products
●
Services
●
Contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special in-
formation on our ASM ProcessLens Dual-lane solder paste inspection machines, such as:
●
Technical documentation
●
Technical information
●
Spare parts catalogs, etc.
Registering for access to the User Group is sheer child’s play:
► Click on ’Register now’.
► Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.
1.4.6 Abbreviations
CEE Commission on the Rules for the Approval of the Electrical Equipment
DLP Digital Light Projector
EMC Electromagnetic compatibility
EMF Electric and Magnetic Fields
ESD Electrostatic sensitive device
GND Ground
MOS Metal-Oxide-Semiconductor
PCB Printed circuit board
SC Station computer
SMD Surface mounted device
2 Safety
2.1 Conventions for the use of safety instructions and symbols
Instruction Guide ASM ProcessLens Dual-lane 06/2018 13
2 Safety
DANGER
Non observance of the following safety instructions may cause injury to personnel
and damage to the machine!
► Please observe the safety instructions in this Instructor Guide!
2.1 Conventions for the use of safety instructions and
symbols
Safety Information
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► These symbol indicates actions that have to be performed by the operator.
2.1.1 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of ASM ProcessLens Dual-lane solder paste inspection
machine and add-on devices and are suitably qualified, e.g.
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
2.1.2 Important notes on operational safety
The following points MUST be observed in order to maintain operational safety:
4 Instruction Guide ASM ProcessLens Dual-lane 06/2018
Table Of Contents
2.2.4 Other Labels.. 28
2.2.4.1 Label - External grounding point.. 28
2.2.4.2 Label – Ground.. 28
2.3 Safety instructions for transporting the machine.. 29
2.4 Safety instructions for operating the machine.. 30
2.4.1 Safety instructions for closing the protective covers.. 30
2.4.2 Insertion of board into the input and output conveyor.. 31
2.4.3 ESD safety of machine.. 31
2.5 Safety features.. 32
2.5.1 Protective hood, doors and covers.. 32
2.5.2 Switches and buttons on the machine.. 34
2.5.2.1 Position of switches and buttons on the machine.. 34
2.5.2.2 Description of functions.. 35
2.5.2.3 Position of protective switch on the machine.. 37
2.5.3 EMERGENCY STOP loops and signaling circuit.. 38
2.5.3.1 EMERGENCY STOP loop structure.. 38
2.5.3.2 Description of the functions of the EMERGENCY STOP loops.. 38
2.6 Residual voltages and discharge times in the machine.. 38
2.6.1 Energy state of the machine after the EMERGENCY STOP button is pressed.. 38
2.6.2 Energy state of the machine after switching off the main power switch.. 39
2.6.2.1 Machine switched off at the main power switch and disconnected.. 39
2.7 Lock out and tag out procedure.. 39
2.7.1 Purpose and scope.. 39
2.7.2 Description.. 40
2.7.3 Testing.. 41
2.7.4 Responsibility and obligations.. 41
2.7.5 Training.. 41
2.7.6 Review.. 41
2.8 ESD Guidelines.. 42
2.8.1 What does ESD mean?.. 42
2.8.2 Important measures to protect against static charging.. 42
2.8.3 Handling ESD modules.. 42
2.8.4 Measurements and modifications to ESD modules.. 43
2.8.5 Dispatching ESD modules.. 43
3 Machine description.. 45
3.1 Overview of the modules.. 45
3.1.1 Overview of assemblies.. 45
3.1.2 Inspection head.. 46
3.1.2.1 Description.. 46
3.1.3 PCB conveyor assembly.. 47
3.1.3.1 Description.. 47
3.1.4 Definition of PCB warpage.. 48
3.1.4.1 PCB warpage on the conveyor.. 48
3.1.4.2 Maximum PCB warpage allowed during processing of the board.. 49
3.2 Technical data.. 51
3.2.1 Dimensions and ambient conditions for machine operation.. 51
3.2.2 Ambient conditions for packaging, transportation and storage.. 51
3.2.3 Center of Gravity.. 52
3.2.4 Electrical Ratings.. 52
3.2.5 Conveyor specifications.. 53
3.2.6 Inspection capabilities.. 53