00900160-01_UM_ASM-ProcessLensDualLane_en.pdf - 第73页

5 Working with the machine  Instruction Guide ASM ProcessLens Dual-lane 06/2018 73 5 Working with the machine For detailed description, please refer to the following documentations: ● ProcessLens Programming Training [I…

4 Setting up and commissioning

4.4 Commissioning the machine

72 Instruction Guide ASM ProcessLens Dual-lane 06/2018

5 Working with the machine



Instruction Guide ASM ProcessLens Dual-lane 06/2018 73

5 Working with the machine

For detailed description, please refer to the following documentations:

●

ProcessLens Programming Training [Item No.: 00900063-xx]

●

ProcessLens Technical Training [Item No.: 00900064-xx]

●

SPC Basic Training [Item No.: 00900065-xx]

●

SPC Advanced Training [Item No.: 00900066-xx]

●

Operator Manual ASM ProcessLens [Item No.: 00900067-xx]

CAUTION

Qualified or adequately trained personnel

► No one may start up, operate or otherwise work on the machine unless they have the

relevant qualification. Using the machine not as prescribed, could endanger life and

limb, and result in material damage. You will find further information about this in sec-

tion 1.1.5 "Failure to use as prescribed" [}9].

► The qualification must be proven by means of training courses or instructions for the

personnel. The instructions are to be given by personnel trained and authorized by

ASM SMT Solutions Team. For an overview of the training courses, refer to section

1.2 "Qualification and training of personnel" [}10].

5 Working with the machine

5.1 Controls and displays

74 Instruction Guide ASM ProcessLens Dual-lane 06/2018

5.1 Controls and displays

5.1.1 Overview

Fig.44: Controls and displays

1 Tower lamp with buzzer 2 LCD monitor

3 Keyboard and mouse 4 EMERGENCY STOP button

5 Main switch 6 Machine idle lamp

7 Key switch 8 Start button (green)

9 Stop button (black)