00900160-01_UM_ASM-ProcessLensDualLane_en.pdf - 第78页

5 Working with the machine 5.2 Switching on/off the ASM ProcessLens Dual-lane 78 Instruction Guide ASM ProcessLens Dual-lane 06/2018

100%1 / 86
5 Working with the machine
5.2 Switching on/off the ASM ProcessLens Dual-lane
Instruction Guide ASM ProcessLens Dual-lane 06/2018 77
5.2 Switching on/off the ASM ProcessLens Dual-lane
NOTICE
Operator Manual ASM ProcessLens
For a detailed description, please refer to the Operator Manual ASM ProcessLens [Item
No.: 00900067-xx]
To switch on the ASM ProcessLens Dual-lanemachine, proceed as follows:
► Check whether the stations are connected to the power supply.
► Perform a visual check of the stations.
► Make sure that there are no obstacles in the travel range of the inspection head assembly.
► Make sure that the conveyor is free of any PCB.
► Switch the station on at the main power switch.
To switch off the ASM ProcessLens Dual-lane machine, proceed as follows:
► End all inspection procedures.
► Make sure there are no boards inside the ASM ProcessLens Dual-lane.
5 Working with the machine
5.2 Switching on/off the ASM ProcessLens Dual-lane
78 Instruction Guide ASM ProcessLens Dual-lane 06/2018
6 Options
6.1 UPS Option
Instruction Guide ASM ProcessLens Dual-lane 06/2018 79
6 Options
6.1 UPS Option
●
Item No.: 00701915-xx
Description
The UPS (APC 620 SC) is an option for the ASM ProcessLens. It is used to prevent data loss in
case of a machine power failure (e.g caused by a facilities breakdown). By using the UPS, the
machine will force the PC to auto save and auto shutdown.
After the installation, whenever the machine is switched on or off, you need to press the UPS
power button. If you power on the machine without pressing the UPS power button, it will not power
up the PC even though the main power switch of the machine is already turned on.
When shutting down, you have to press the power button of the UPS after the machines is turned
off with the main switch.
6.2 Barcode rail extension
●
Item No.: 03170788-xx
Description
The barcode rail extension is needed for the barcode scanner module.