i3070_Software_Installation.pdf.pdf - 第4页
4 i3070 Software Installation Preparation 1 Ensur e that the PC meets the System r equir ements on page 5. 2 Make a complete system backup befor e installing the softwar e. 3 If you ar e upgrading the i3070 soft war e fr…
Keysight i3070 In-Circuit Test Software
Software Installation Guide
i3070 Software Installation
Preparation 4
System requirements 5
Critical folders and files 6
Installing the i3070 Software 7
Installing Software Licenses 13
Installing Node-Locked Licences 13
Setting Up Client Machines to Use Floating Licenses 14
Viewing Licenses 15
Other Tasks 16
Copying user data 16
Installing the online help 17
System backup and recovery 17
Troubleshooting 18
Troubleshooting software installation 18
Troubleshooting i3070 software on Windows 11 19
Reinstall XServer 19
Uninstalling the i3070 In-Circuit Test Software 20
i3070 Users on Testhead Controller 21
This guide explains how to install the Keysight i3070 In-Circuit Test software
release 11.10p. This software release can be used for:
• Upgrading i3070 systems with software release 10.xxp.
• Upgrading i3070 systems with software release 09.xxp.
• First-time installation on new testhead controllers or test development
workstations.
In case of difficulty...
To contact Keysight technical support, go to www.keysight.com/find/contactus.
If you find a Keysight product or solution is impacted by a cyber security issue,
please report it using this link: Report a Product Cybersecurity Issue | Keysight.
4 i3070 Software Installation
Preparation
1 Ensure that the PC meets the System requirements on page 5.
2 Make a complete system backup before installing the software.
3 If you are upgrading the i3070 software from a previous release:
a At least back up the critical files listed in Table 2, if you are unable to do a
full backup.
b Remove the previous releases of the i3070 software using the Remove All
option.
4 Obtain the host ID of the PC for license redemption.
a Insert the Keysight software installation disk into the drive.
b In the installation window, click Install Keysight PathWave License
Manager.
c Launch PathWave License Manager using its desktop icon .
d On the Add License tab, note the MAC address listed under This machine's
host ID. If there is more than one host ID, you can choose to use any one.
5 Redeem your software licenses following the instructions in your Software
Entitlement Certificate.
Then proceed to Installing the i3070 Software on page 7.
Starting from Pathwave License Manager version 7, frequently disconnected
Ethernet devices (such as docking stations or USB Ethernet dongles) can no
longer be used to host Keysight software licenses. If you have current licenses tied
to such a device, contact a Keysight representative to rehost the licenses.
i3070 system with ControlXTPA module control cards:
• Uninstalling the i3070 software using Remove All removes the BOOTP Turbo
program, which is required for network configuration of ControlXTPA cards.
• After completing the i3070 software installation, reinstall BOOTP Turbo and
reconfigure the system. Refer to the BOOTP Turbo Installation and Network
Configuration guide.
This is not needed if the i3070 system uses ControlXTPB cards.
i3070 Software Installation 5
System requirements
Before installing the software, ensure that the workstation has a DVD-ROM drive
and meets the following specifications.
Table 1 System requirements
Specifications
Processor Recommended: Intel Core i5 and above
Operating System Windows 10 Pro (64-bit)
Windows 10 Enterprise (64-bit) version 22H2 or later
Windows 11 Pro
Ensure that all Windows updates are installed.
Memory Recommended: 8 GB of RAM (minimum 4 GB)
Available Disk Space Recommended: 10 GB (minimum 5 GB), must be on drive C
Display Properties • Screen resolution: at least 1280 x 1024 pixels
• Color quality: at least 16-bit
Language Setting Must be English (United States).
If you are upgrading a controller to Windows 10, ensure that
it meets the Windows system requirements and there are no
compatibility issues.