00193790-01.pdf - 第113页

Installation and Getting Started with CACCIA 2 English Issue 07/2004 2.10 O verview of the J umper Settings for Individual Subsystems 47 Description LED‘s: –L Z OS Lig ht b arrie r Z -axis upp er stop –L Z US Lig ht b ar…

100%1 / 130
2 English Installation and Getting StartedwithCACCIA
2.10 Overview of the Jumper Settings for Individual Subsystems Issue 07/2004
46
2.10.2.4 Head Adapter for 6/12 C&P Head
At the head modularity we can use the same head adapter for the 6 and 12 segment C&P heads.
The head adapter must be exchanged if you mounting the Twin head.
Fig. 2 - 36 Head adapter for 6/12 C&P head
Legend
(1) X6-X9 Connector for CAN Processor board’ 80C515C 8Bit
(2) X2/X3 Connector for the stepping motor board
(3) X10 Connector vacuum board
(4) X12 Dp station (motor, track signal)
(5) X26 Option component sensor
(6) X13/14 connector for the flat cable to the intermediate distribution board
(7) Connector to the head interface
1
2
45
3
6
7
LED‘S
Installation and Getting Started with CACCIA 2 English
Issue 07/2004 2.10 Overview of the Jumper Settings for Individual Subsystems
47
Description LED‘s:
–LZOS Light barrier Z-axis upper stop
–LZUS Light barrier Z-axis down position
– LSM Stepper motor board not connected
–LSZD Light barrier Swivel in and turning dp-station
–LSVZ Light barrier Vacuum / air kiss Z-axis
– LSVA Light barrier Vacuum / air kiss reject position
2.10.2.5 Stepping motor board
The stepping motor board for the valve drivers and the swivel function on the DP station are
mounted onto the head adapter below the CAN processor board 80C515C. Is the board missing
the LSM LED at the head adapter is ON. In this case the CAN Bus Processor board can not fixed.
Fig. 2 - 37 Stepping motor board
2
3
1
Stepping motor reject position
(for S/F. HS and HF machine)
Steppingmotorpickup,placement and
reject position HF/HF3
Stepping motor DP-axis
2 English Installation and Getting StartedwithCACCIA
2.10 Overview of the Jumper Settings for Individual Subsystems Issue 07/2004
48
2.10.2.6 CAN Processor Board 8Bit 80C515C on the Head Adapter C&P
Fig. 2 - 38 CAN Processor board
Fig. 2 - 39 Table: DIP Switches
Description
DIP Switches and
7 Segment display
see below.
DIP Switch
ON
78123456
Gantries Switch 7 Switch 8
Gantry 1 ON ON
Gantry 2 ON OFF
Gantry 3 OFF ON
Gantry 4 OFF OFF