00193790-01.pdf - 第117页

Installation and Getting Started with CACCIA 2 English Issue 07/2004 2.10 O verview of the J umper Settings for Individual Subsystems 51 Description LED‘S and DIP switch head interface: LED 1- 7 (fun ctional chec k) – SP…

100%1 / 130
2 English Installation and Getting StartedwithCACCIA
2.10 Overview of the Jumper Settings for Individual Subsystems Issue 07/2004
50
2.10.3 SIPLACE HF3: Switches and PCB Boards on the Twin Head:
2.10.3.1 Head Interface
The same head interface board is used on gantry 1/2 for the Twin head and C&P head.
Fig. 2 - 41 Head Interface
Legend
(1) X11 Connector Temperature sensor X-Axis
(2) X17 Connector BERO travel range X-Axis
(3) X16 Connector BERO travel range X-Axis
(4) X15 Connector for incremental encoder X-Axis
(5) X24 Test connector digital track signals X-Axis
LED 1-7 TP 1-8
LED 1-10
DIP Switch
1
2
3
4
5
Installation and Getting Started with CACCIA 2 English
Issue 07/2004 2.10 Overview of the Jumper Settings for Individual Subsystems
51
Description LED‘S and DIP switch head interface:
LED 1-7 (functional check)
– SPI - Serial parallel interface (A/D or D/A converter in future)
– D-ON - Digital ON 5V DC/DC Converter
– H-OK - Head adapter board connected
– C-In - CAN Internal not used
– MRST - Main Reset
– F-UC- not used
– MP - Main Power fail, indicates 5 V power supply being missing at the machine
(e.g. CAN Bus)
LED 1-10 (LED´s for voltages)
– Vcc - Power supply +5 V head interface
– N15V - Minus 15 Volt (from the Axis unit → Error → LED red)
– P3,3V - not used
– P15V - Plus 15 Volt (from the Axis unit → Error → LED red)
– P24V - 24 Volt power supply (e.g.stepper motor)
– AV ER - not used
– ENAN-notused
– P5V - 5 Volt Power supply track signals X-Axis → ON Power fail
– VccF - 5 Volt for digital
– TMP - Temperature monitoring X-Axis
2 English Installation and Getting StartedwithCACCIA
2.10 Overview of the Jumper Settings for Individual Subsystems Issue 07/2004
52
2.10.3.2 Vision Board
The vision board is connected on the top of the head interface. That board is also used on the
gantry 1 with a C&P head.
Fig. 2 - 42 Vision board
Legend
(1) Connector illumination PCB camera
(2) Connector video signals PCB camera
(3) LED‘s P15V - 15Volt / Vcc - Power supply vision board
(4) DIP Switch
(5) CAN Processor 16 Bit (additional board on the vision board)
(6) DC/DC Converter 15 → 5V for visionsystem
4
5
1
3
2
6