00195044-10_UM_VisionTeachStation_DE EN.pdf - 第129页

Vision Teach Station User Manual 5 Installing the cameras 12/2012 Edition 5.2 Installing head cameras, type 28, 29 and 30 129 5 Fig. 5.2 - 10 Base module with camera type 28 Key to fig. 5.2 - 10 , page 129 (1) Magnetic s…

100%1 / 184
5 Installing the cameras Vision Teach Station User Manual
5.2 Installing head cameras, type 28, 29 and 30 12/2012 Edition
128
5
Fig. 5.2 - 9 Running the cables for the camera type SST 28/29 and 23
(1) Wire management mount
(2) Pillar
(3) Wire management mount on camera type 29
(4) Adapter for head camera
5.2.4 Fitting the component support
Release the lock on the positioning unit (item 2 in Fig. 5.2 - 10, page 129) using the magnetic
switch (item 1 in Fig. 5.2 - 10, page 129)
Push the positioning unit out.
Fix the component support (item 5 in Fig. 5.2 - 10, page 129) using the two hexagon socket
head screws M3 x 8 (item 4 in Fig. 5.2 - 10, page 129) to the holder (item 3 in Fig.
5.2 - 10, page 129).
Push the positioning unit (item 2 in Fig. 5.2 - 10, page 129) back towards the pillar (item 6 in
Fig. 5.2 - 10, page 129) and lock the positioning unit in place.
(1)
5
(2)
5
(1)
(3)
5
(4)
Vision Teach Station User Manual 5 Installing the cameras
12/2012 Edition 5.2 Installing head cameras, type 28, 29 and 30
129
5
Fig. 5.2 - 10 Base module with camera type 28
Key to fig. 5.2 - 10, page 129
(1) Magnetic switch
(2) Positioning unit
(3) Holder for component support
(4) Hexagon socket head screw M3 x 8, 2x
(5) Component support, camera type 28/29
(6) Pillar
5 Installing the cameras Vision Teach Station User Manual
5.2 Installing head cameras, type 28, 29 and 30 12/2012 Edition
130
(7) Connection for cable, head camera 1 (03040353-W1: 26-pin, 03040353-W2: 12-pin)
(8) Connection for cable, head camera 2 (03040353-W1: 26-pin, 03040353-W2: 12-pin)
(9) Connection for camera bus cable to the PC (03040359-xx)
(10)Connection for CAN bus cable to the PC (03040362-xx)
5.2.5 Connecting the adapter, base module and PC
Connect the camera bus connection on the base module (item 9 in Fig. 5.2 - 10, page 129) to
the card for the camera bus interface in the PC (item 1 in Fig. 4.3 - 2, page 115) with the cable
03040359-xx.
Connect the CAN bus connection on the base module (item 10 in Fig. 5.2 - 10, page 129) to
the interface card in the PC (item 2 in Fig. 4.3 - 2, page 115) with cable 03040362-xx.