00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第14页

1 Introduction 1.7 Staff Qualifications and Training 14 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017

100%1 / 286
1 Introduction
1.7 Staff Qualifications and Training
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 13
1.7 Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.
1 Introduction
1.7 Staff Qualifications and Training
14 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
2 General
2.1 Requirements
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 15
2 General
X Feeder Care is a package of tools, testing equipment and documents, such as manuals, de-
signed to help your service staff independently perform inspection and cleaning work, plus the most
frequent repair tasks to X feeder modules.
X Feeder Care is used in the production and maintenance environment (repair shop). Furthermore,
the X Feeder Test Station can be used, for example, at the pre-setup unit (setup area), to rapidly
check the functionality of feeders e.g. before these are stored away.
The areas in which the X Feeder Test Station and the tools provided with it are used are ESD-com-
patible. This ensures that neither that equipment itself or the components in the feeder are at risk.
The X Feeder Care [00140113-01] product consists of:
●
X Feeder Test Station [03076685-xx]
●
Job Guide "X Feeder Test Station" (German [00196352‑xx], English [00196353‑xx]
Other languages on request.
●
Job Guide "X Feeder Inspection and Maintenance" (German [00196358-xx], English
[00196359‑xx]
Other languages on request.
●
Service manual "X Feeder Care" for SmartFeeder X (German [00198504‑xx], English
[00198505-xx])
●
X Feeder Care tools (included in package and not available for individual order)
The X Feeder Care processes differ as follows:
●
Inspection
Tasks to check and assess the current state of the feeder modules
●
Service
Regular tasks as detailed in the service manual for inspection and cleaning, lubrication and
replacement of consumables and wear parts.
●
Repair
Tasks, for resetting defective feeders back to their original, functional state
NOTICE
Area of application
The tasks described in this manual apply for the following areas:
- SmartFeeder 2x8mmX
- SmartFeeder 4mmX - 104mmX
2.1 Requirements
To correctly repair X feeder modules, you require an ESD-compatible workplace with a stable, level
and clean surface.
2.2 Warranty
CAUTION
Observe the clauses in the warranty agreements for your feeder.
On the bottom right side of the tape drive, you will find a warranty seal. If you still have a
valid warranty claim for the feeder module, this will be violated if you break the warranty
seal.