00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第18页
2 General 2.5 Creating new labels for feeder modules 18 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 4. Click on the Feeder Label Tool button. 5. Enter the feeder module Part No . Enter the feeder module Feede…
2 General
2.5 Creating new labels for feeder modules
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 17
2.5 Creating new labels for feeder modules
If you need replacement labels for your feeder modules, you can create these online, at the
SIPLACE website. Simply enter the serial number and the feeder ID of the SIPLACE feeder mod-
ule and the SIPLACE Feeder Label Tool will generate a new label for you to download.
► Start your internet browser.
1. Enter the URL www.SIPLACE.com in the address line.
2. In the website header, click on the MYSPACEicon .
3. Click on the Feeder Label Toolicon .
2 General
2.5 Creating new labels for feeder modules
18 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
4. Click on the Feeder Label Tool button.
5. Enter the feeder module Part No.
Enter the feeder module Feeder ID.
Select whether it is a Single Track Feeder or a Multi Track Feeder.
Click on the Generate button.
The label for your feeder module will be generated for downloading.
3 X-Feeder Test Station
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 19
3 X-Feeder Test Station
The X Feeder Test Station [03076685-xx],consists of an X Feeder Testbox and a Single Slot EDIF
(SSE) with base plate, on which the relevant X feeder modules are placed for checking. The SSE is
connected to the X Feeder Testbox via a CAN cable and is supplied with power via a power pack.
The X Feeder Testbox can be used to test the following feeder modules:
●
X Feeder 4-88mm
●
SmartFeeder 2x8mmX
●
SmartFeeder 4-16mmX
The X Feeder Testbox has the following functions:
●
Checking the feeder module (test)
The X Feeder Testbox checks the following in one run:
– Whether the feeder has stored an error.
If this is the case, the test will be terminated and the corresponding error number will be
shown on the display. Reset the error and then restart the test.
The documentation supplied includes detailed instructions about how to reset the relevant
error.
– The functionality of the foil rocker
– The functionality of the tape drive
– The functionality of the foil disposal drive
●
Reference run (X feeder modules only)
●
Resetting the service counter (SmartFeeders only)
●
Updating firmware of the feeder module
●
Downloading the feeder module log file
NOTICE
Background illumination
To protect the background illumination and the display of the X Feeder Care Testbox, the
display and the lighting are switched off if the device is not used for more than 15 minutes.
To switch the display and lighting back on, turn or press the knob on the X Feeder Testbox.
The currently active function of this knob will not be executed in this case.
For a detailed description of how to operate the X Feeder Test Station, refer to the Job Guide "X
Feeder Test Station " (German [00196352-xx], English [00196353-xx], other languages on re-
quest).