00198505-01_SM_SIPLACE_SmartFeeder_EN.pdf - 第3页
3 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 Table of contents Table of contents 1 Introduction .. 11 1.1 Safety Instructions .. 11 1.1.1 Conventions for the Use of Safety Instructions and Symbols .. 1…
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00198505-01
www.asm-smt.com Printed by ASM Assembly Systems
3Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
Table of contents
Table of contents
1 Introduction.. 11
1.1 Safety Instructions.. 11
1.1.1 Conventions for the Use of Safety Instructions and Symbols.. 11
1.2 Environmentally-Friendly Disposal of Materials and Components.. 12
1.3 Use of Original SIPLACE Accessories and Spare Parts.. 12
1.4 Information About This Service Manual.. 12
1.5 Release History.. 12
1.6 SIPLACE on the World Wide Web (WWW).. 12
1.7 Staff Qualifications and Training.. 13
2 General.. 15
2.1 Requirements.. 15
2.2 Warranty.. 15
2.3 Equipment Required.. 16
2.4 Safety Instructions.. 16
2.5 Creating new labels for feeder modules.. 17
3 X-Feeder Test Station.. 19
3.1 X Feeder Test Station Error Messages.. 20
3.2 Rare Errors.. 22
4 X Feeder Verification System.. 23
5 Diagnosis and Solutions.. 25
5.1 Assignment of Symptoms/Repairs.. 25
6 Repairs to SmartFeeder 4 mm X.. 27
6.1 Front sliding guide/sliding foil.. 27
6.1.1 Removing the Sliding Foil.. 27
6.1.2 Fitting the Sliding Foil.. 28
6.2 Rear Sliding Guide.. 28
6.2.1 Removing the Sliding Guide.. 29
6.2.2 Fitting the Sliding Guide.. 29
6.3 Side Covers.. 30
6.3.1 Removing the Left Side Cover.. 31
6.3.2 Fitting the Left Side Cover.. 31
6.3.3 Removing the Right Side Cover.. 32
6.3.4 Fitting the Right Side Cover.. 33
6.4 EDIF.. 34
6.4.1 Removing the EDIF.. 35
6.4.2 Fitting the EDIF.. 36
6.5 Pickup window.. 37
6.5.1 Removing the Pickup Window.. 38
6.5.2 Fitting the Pickup Window.. 38
6.5.3 Removing the actuator.. 40
6.5.4 Fitting the actuator.. 40
4 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
Table of contents
6.6 Splice sensor.. 41
6.7 Drives.. 41
6.7.1 Foil motor.. 41
6.7.1.1 Removing the Foil Disposal Motor.. 42
6.7.1.2 Fitting the Foil Disposal Motor.. 44
6.8 Foil rocker.. 47
6.8.1 Foil rocker assembly.. 47
6.8.1.1 Removing the Foil Rocker Assembly.. 48
6.8.1.2 Fitting the Foil Rocker Assembly.. 49
6.8.2 Replacing individual foil rocker parts.. 50
6.8.2.1 Replacing the foil rocker, axis and pressure spring.. 50
6.8.2.2 Replacing the creasing roller and roller axis.. 52
6.8.2.3 Replacing the light barrier transmitter.. 52
6.8.2.4 Replacing the rocker bearing unit.. 53
6.9 Rocker.. 53
6.9.1 Removing the rocker.. 54
6.9.2 Fitting the rocker.. 55
6.9.3 Replacing individual rocker parts.. 56
6.10 Tamp wheel.. 58
6.10.1 Removing the tamp wheel.. 59
6.10.2 Fitting the tamp wheel.. 61
6.11 Wiper.. 64
6.11.1 Removing the wiper 4 mm X.. 65
6.11.2 Fitting the wiper 4 mm X.. 65
6.12 Flap/drip tray for cover foil.. 66
6.12.1 Replacing the drip tray and shaft.. 67
6.13 Foil disposal blade.. 68
6.13.1 Removing the Blade Partition Wall.. 68
6.13.2 Fitting the Blade Partition Wall.. 68
6.14 Insertion foil container.. 69
6.14.1 Replacing the foil container.. 69
6.15 Handle with control panel.. 70
6.15.1 Control Panel Assembly.. 70
6.15.1.1 Removing the Control Panel and Board.. 71
6.15.1.2 Fitting the Control Panel and Board.. 72
6.16 Control board.. 73
6.16.1 Removing the control board.. 74
6.16.2 Fitting the control board.. 75
6.16.3 Performing a reference run.. 77
7 Repairs to SmartFeeder 8 mm X.. 79
7.1 Front sliding guide/sliding foil.. 79
7.1.1 Removing the Sliding Foil.. 79
7.1.2 Fitting the Sliding Foil.. 80
7.2 Rear Sliding Guide.. 80
7.2.1 Removing the Sliding Guide.. 81
7.2.2 Fitting the Sliding Guide.. 81
7.3 Side Covers.. 82
7.3.1 Removing the Left Side Cover.. 83
7.3.2 Fitting the left side cover.. 83
7.3.3 Removing the right side cover.. 84