00198763-02_VD_SIPLACE_Pro_17.1_R20-1_EN_DE.pdf - 第13页
SIPLACE Pro 17.1 (R 20-1) / Versi on Description 05/2020 Edition 13 – SIPLACE JTF-ML 14X and JTF -ML 18X (TX-series o nly) – SIPLACE JTF-ML 2 7/7 and J TF- ML 2 9/9 (TX -series o nly) – JTF-MW E (E-s eries only) – SIPLAC…
SIPLACE Pro 17.1 (R20-1) / Version Description 05/2020 Edition
12
If functional restrictions should occur in rare cases on the SIPLACE S2x, SIPLACE F4,
SIPLACE F5, SIPLACE F5-HM as well as on the SIPLACE HSx and SIPLACE HFx
machines, ASM Assembly Systems is not obliged to correct the error due to the
discontinuation decision specified above.
ASM Assembly Systems reserves the right to finally discontinue support for the SIPLACE
S2x, SIPLACE F4, SIPLACE F5, SIPLACE F5-HM as well as the SIPLACE HSx and
SIPLACE HFx placement machines in the SIPLACE Pro and Setup Center software
products, after having issued a timely adequate advance notice.
NOTICE
The following station software versions are not supported by SIPLACE Pro anymore:
– 506
– 601, 602, 603, 604
– 701, 702, 703, 704
If a station with one of the removed versions exists in SIPLACE Pro, the version will be
set to the following supported version of the corresponding platform:
– 505 Full
– 605
– 707
3.2 Supported DEK Printer Software Versions and Printer Types
DEK Printer Version
Printer Types
DEK Printer Software Version V09
(Printer Programming 2.0)
DEK Printers running V09 software
*)
Table 3-2: Supported DEK printer software versions and printer types
*)
The version number listed above is accurate at the time of compiling this document.
Please note that it is subject to change without prior notice. For further details please contact your
sales representative.
3.3 Supported Feeder Types
The following feeders are supported by SIPLACE Pro:
Feeder Modules from ASM Assembly Systems
– 4 mm – 104 mm X-feeder
– 8 mm - 88 mm E (E-series only)
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
SIPLACE Pro 17.1 (R20-1) / Version Description 05/2020 Edition
13
– SIPLACE JTF-ML 14X and JTF-ML 18X (TX-series only)
– SIPLACE JTF-ML2 7/7 and JTF-ML2 9/9 (TX-series only)
– JTF-MW E (E-series only)
– SIPLACE BulkFeeder X
– Arbitrary Carrier X
– Conveyor Carrier X
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5 / WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
– Stick feeder with X-adapter
Processing Feeders from ASM Assembly Systems
– MeasuringFeeder X
– SIPLACE Glue Feeder
– Reject conveyor with X-adapter
– Linear Dipping Module X
– Linear Dipping Unit 2 X
– Linear Dipping Unit 2 E (E-series only)
– Label feeder with X-adapter
– Splice sensor X-feeder
Modules from 3
rd
party suppliers
– FFI feeders:
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE MSF 60 AX
IPTE MSF XL80 AX
– SEMO CRF80 tape feeder
SIPLACE Pro 17.1 (R20-1) / Version Description 05/2020 Edition
14
3.4 List of Hidden Unused Hardware Types
The following list shows the hardware types that are hidden by default per SIPLACE Pro version:
SIPLACE machine types
SIPLACE
Machine Type
R19-2
R20-1
CA3
✓
✓
CA4
✓
✓
CA4 L
✓
✓
CF
✓
✓
CS
✓
✓
D1
✓
✓
D2
✓
✓
D3
✓
✓
D4
✓
✓
DX1
✓
✓
DX2
✓
✓
DX4
✓
✓
F4
✓
✓
F4 6
✓
✓
F5
✓
✓
F5HM
✓
✓
HF
✓
✓
HF3
✓
✓
HS50
✓
✓
HS55 P
✓
✓
HS60
✓
✓
S20
✓
✓
S23
✓
✓
S25HM
✓
✓
S25HM 2
✓
✓
SX1/SX2
✓
✓
TX1/TX2/TX2i
✓
TX2i W
✓
SX4
✓
✓
X2
✓
✓
X3
✓
✓
X4
✓
✓
X4I
✓
✓