00196785-01-IM-Traceability 3.2_en.pdf - 第13页

Installation Traceability Installation Installation Manual SIPLACE Traceability 3.2 13 Fill Level Control (1) Fill Level Control (2) X If the fill level co ntrol should be disabled for single tracks, activate the checkbo…

Installation Traceability

Installation

12 Installation Manual SIPLACE Traceability 3.2

Setup verification system

Configuration of the Splice Detection

NOTE:

This Dialog will only appear for the machine with the station-software version 407.05 and

505.05!

X The station software version 407.05 and

505.05 offers two different interfaces to the

Setup verification system. By choosing the

corresponding Setup verification system the

interface will be configured in the station-

software accordingly.

X Click Next to continue.

NOTE:

This dialog will not appear for X series machines since the splice interface is always integrated

into the X feeders and is not available for S feeders at these machines!

X Select the checkbox Splice detection

existing, if a splice detection is available.

X Enter the COM Port where Splice detection is

plugged in.

X Click Next to continue.

Installation Traceability

Installation

Installation Manual SIPLACE Traceability 3.2

Fill Level Control (1)

Fill Level Control (2)

X If the fill level control should be disabled for

single tracks, activate the checkbox "Running

tracks" empty is allowed. After that you can

let single tracks go empty consciously.

X Click Next to continue.

X If the filling level correction should be allowed,

activate the checkbox Operator may correct

the filling level. After that the operator may

correct the filling level. Otherwise only the user

with the right "LineEngineer" and higher can

correct the filling level.

X Click Next to continue.

Installation Traceability

Installation

14 Installation Manual SIPLACE Traceability 3.2

Traceability

Overview of the settings

X Here you can choose whether the Traceability

data should be generated.

X Furthermore you can select the File version

1.0 for standard Traceability file or the File

version 2.0 for extended Traceability file.

X Click Next to continue. Wait until the next

dialog box appears. It can take a few minutes.

NOTE:

To get the full information we recommend using the File version 2.0.

X Here you can see the overview of the settings.

X Click Back to review or change the settings.

X Click Next to continue the installation.