00196785-01-IM-Traceability 3.2_en.pdf - 第26页

Installation Trace Host and Trace Service Trace Service Installation 26 Installation Manual SIPLACE Traceability 3.2 5.3 T race Service 5.3.1 Inst a llation NOTE: Trace Service requires the SIPL ACE Pro XML Adapter in or…

100%1 / 46
Installation Trace Host and Trace Service
Software Components and Configuration Support Media DVD
Installation Manual SIPLACE Traceability 3.2
25
X Click Next to continue.
The following window appears:
X You may investigate the installation script
output by clicking Output Details Products do
not have utilizable output.
X Click Next to continue.
The following window appears:
If at least one prerequisite requires rebooting, the
Reboot now checkbox will be visible.
X Select/Deselect the Reboot now checkbox if
available.
X Click the Finish button
The Prerequisite Analyzer closes. If selected, the
computer reboots.
Installation Trace Host and Trace Service
Trace Service Installation
26 Installation Manual SIPLACE Traceability 3.2
5.3 Trace Service
5.3.1 Installation
NOTE:
Trace Service requires the SIPLACE Pro XML Adapter in order to load the line configuration
from SIPLACE Pro.
X Make sure that Line Control GUI and the SIPLACE Pro Interface or
SIPLACE Pro Desk and the SIPLACE Pro Interface are already installed.
X Place the SIPLACE Traceability CD into the
CD-ROM drive of your line computer. You will
see the start screen.
X Select SIPLACE Trace Service 3.2. You will
be guided through the Trace Service
installation procedure.
The dialog boxes shown below will be displayed
during the installation procedure.
The Welcome dialog will appear.
X Click on Next to continue the installation
procedure.
Installation Trace Host and Trace Service
Installation Trace Service
Installation Manual SIPLACE Traceability 3.2
27
X Read the license agreement. If you agree with
the conditions, click on I Agree, otherwise
click on I Do Not Agree. If you select I Do Not
Agree, the installation procedure will be termi-
nated.
X Click on Next to continue the installation
procedure.
X Now specify the folder in which you wish to
install the application. The default folder is
C:\Program Files\SIPLACE\SIPLACE
Trace Service
. You can alter the default
installation folder by using the Browse…
button.