L-9517-9563-06-A_Data_sheet_ATOM_en.pdf - 第17页

17 A TOM miniature encoder system 15 1 8 6 min 16 40 33.3 R > 20 Dynamic bend radius R > 10 Static bend radius 8 4-40 unc × 2 52 CAL / A GC push button switch access hole Ø3.15 Dimensions and tolerances in mm Ri in…

100%1 / 36
16 ATOM miniature encoder system
40µm system
ACi speed
20µm system
Dimensions and tolerances in mm
PCB mounting variant dimension drawing
16.1
10.1
25
4.5 × 45°
25
4
4
5.6
5.6
12.5
17
2 mounting holes M3 through
CAL pad
CAL pad
Component area
Component area
5.6
14.5
Angular speed
Angular speed depends on disc optical diameter – use the following equation to convert to rev/min:
Angular speed (rev/min) =
V × 1000 × 60
p D
where V = maximum linear speed (m/s) and D = optical diameter (mm)
Maximum speed (m/s)
Lowest recommended
counter input frequency
(MHz)
0020
(2 µm)
0040
(1 µm)
0080
(0.5 µm)
0100
(0.4 µm)
0200
(0.2 µm)
0400
(0.1 µm)
1000
(40 nm)
2000
(20 nm)
13 13 13 11.6 6 - - -
40
13 13 8 6.4 3.2 - - -
20
- - - - - 0.7 0.26 0.12
12
13 8 4 3.2 1.6 - - -
10
- - - - - 0.36 0.12 0.06
6
8 4 2 1.6 0.8 - - -
5
- - - - - 0.24 0.08 0.04
4
Maximum speed (m/s)
Lowest recommended
counter input frequency
(MHz)
0020
(1 µm)
0040
(0.5 µm)
0080
(0.25 µm)
0100
(0.2 µm)
0200
(0.1 µm)
0400
(50 nm)
1000
(20 nm)
2000
(10 nm)
6.5 6.5 6.5 5.8 3 - - -
40
6.5 6.5 4 3.2 1.6 - - -
20
- - - - - 0.35 0.13 0.06
12
6.5 4 2 1.6 0.8 - - -
10
- - - - - 0.18 0.06 0.03
6
4 2 1 0.8 0.4 - - -
5
- - - - - 0.12 0.04 0.02
4
17 ATOM miniature encoder system
15
1
8
6 min
16
40
33.3
R > 20 Dynamic bend radius
R > 10 Static bend radius
8
4-40 unc × 2
52
CAL / AGC push button switch access hole Ø3.15
Dimensions and tolerances in mm
Ri interface
Dimension drawing
18 ATOM miniature encoder system
Ri speed
Clocked outputs
Ri0100, Ri0200 and Ri0400 interfaces have clocked outputs.
Customers must ensure they comply with the lowest recommended counter input frequency.
Non-clocked outputs
Ri0004, Ri0008, Ri0020 and Ri0040 interfaces have non-clocked outputs.
Angular speed
Angular speed depends on disc optical diameter – use the following equation to convert to rev/min:
Angular speed (rev/min) =
V × 1000 × 60
p D
where V = maximum linear speed (m/s) and D = optical diameter (mm)
Analogue outputs
40µm system - 20m/s (−3dB)
20µm system - 10m/s (−3dB)
Maximum speed (m/s)
Lowest recommended
counter input frequency
(MHz)
20 µm system 40 µm system
0100
(0.2 µm)
0200
(0.1 µm)
0400
(50 nm)
0100
(0.4 µm)
0200
(0.2 µm)
0400
(0.1 µm)
- 0.8 0.4 - 1.6 0.8
12
- 0.5 0.25 - 1 0.5
10
0.8 0.4 0.2 1.6 0.8 0.4
6
0.5 0.25 0.12 1 0.5 0.24
4
20 µm system 40 µm system
Lowest recommended counter
input frequency (MHz)
Interface type Maximum speed (m/s) Interface type Maximum speed (m/s)
0004 (5 µm) 10 0004 (10 µm) 20
0008 (2.5 µm) 10 0008 (5 µm) 20
0020 (1 µm) 10 0020 (2 µm) 20
0040 (0.5 µm) 10 0040 (1 µm) 20
Encoder velocity (m/s)
Resolution (µm)
× 4
safety
factor