00193802-01.pdf - 第104页
3 Technical data User Manual SIP LACE CF 3.11 Nozzle changer for the 6-segment C ollect&Place head Sof tware version SR.101.xx 06/2003 US E dition 104 3.1 1.5 Emptying t he reject bin The rejec t bin can hold appr ox…
User Manual SIPLACE CF 3 Technical data
Software version SR.101.xx 06/2003 US Edition 3.11 Nozzle changer for the 6-segment Collect&Place head
103
3.11.4 Notes on operation
Æ When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label
to identify the type.
NOTE 3
Fill the magazines off the machine and always replace complete magazines. 3
Æ Open the locking plate and place the nozzles in the nozzle holders.
Æ Close the locking plate so that the nozzles cannot drop out of the magazines.
CAUTION 3
Before you fill magazine, make sure that all the nozzles on the Collect&Place head have
been returned to their magazines. 3
Æ Programming the nozzle changer is described in the SIPLACE C Pro user manual.
NOTE 3
Æ Do not allow components to drop onto the magazines. If they do, they could jam the locking
plate.
Æ Do not allow components to drop onto free feeder locations. They will stick to the magnetic
bar. Production may have to be interrupted if the feeders are not placed on the component
table correctly. You should therefore regularly clean the magazines and free locations.
3 Technical data User Manual SIPLACE CF
3.11 Nozzle changer for the 6-segment Collect&Place head Software version SR.101.xx 06/2003 US Edition
104
3.11.5 Emptying the reject bin
The reject bin can hold approx. 50 nozzles in the 9xx nozzle family. To prevent malfunctions in
the placement process, you must empty the reject bin at regular intervals.
Fig. 3.11 - 3 Emptying the reject bin, 6-segment Collect&Place head
3
(1) Remove the reject bin
Æ Pull the reject bin out of its retainer in the direction indicated by the arrow, and lift the bin out
of its holder.
Æ To return the reject bin, push it back into the retainer.
User Manual SIPLACE CF 3 Technical data
Software version SR.101.xx 06/2003 US Edition 3.11 Nozzle changer for the 6-segment Collect&Place head
105
3.11.6 Changing the magazine
Æ To remove the magazine, push the spring hook (item 1 in Fig. 3.11 - 4) away from the maga-
zine. Lift the magazine out of the carrier.
Fig. 3.11 - 4 Changing the magazine
3
(1) Spring hook
(2) Retaining clamp
(3) Centering hole
(4) Slot
(5) Carrier
(A) Push the spring hook away from the magazine
NOTE 3
Make sure that you insert the magazine so that the centering pins slide into the centering hole
(item 3) and slot (item 4). 3
Æ First place the side of the magazine with the centering hole (item 3) and the slot (item 4) on
the base (5). The two knobs on the magazine must slide into the retaining clamp (item 2).
Æ Push the spring hook (item 1) away from the magazine.