00193802-01.pdf - 第143页
User Manual SIPLAC E CF 6 Component han dling Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders 143 6.2.4 12/16 mm S f eeder Fig. 6.2 - 4 12/16 mm S feeder 6 Part no. 00141092- xx Width 30.…
6 Component handling User Manual SIPLACE CF
6.2 Technical data for the feeders Software version SR.101.xx 06/2003 US Edition
142
6.2.3 3x8mm S feeder for 0201/0402 components
Fig. 6.2 - 3 3x8 mm S feeder for 0201/0402 components
6
Part no. 00141099-xx
Width 30.6 mm
Component range 0201, 0402
Tracks per feeder 3
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 10,000 to 15,000
Transport distance (variable) 2mm / 4mm
User Manual SIPLACE CF 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders
143
6.2.4 12/16 mm S feeder
Fig. 6.2 - 4 12/16 mm S feeder
6
Part no. 00141092-xx
Width 30.6 mm
Tracks per feeder 1
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 4000
Transport distance (variable) 4mm, 8mm, 12mm, 16mm
6 Component handling User Manual SIPLACE CF
6.2 Technical data for the feeders Software version SR.101.xx 06/2003 US Edition
144
6.2.5 12 mm S feeder for capacitors based on powdered metal, model C/D
Fig. 6.2 - 5 12 mm S feeder for capacitors based on powdered metal, model C/D
6
Part no. 00141118-xx
Width 30.6 mm
Tracks per feeder 1
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 4000
Maximum tape height 3.6 mm
Transport distance (variable) 4mm, 8mm, 12mm, 16mm
PLEASE NOTE 6
Using this feeder type you can adjust the height of the tape support at the pick-up position. 6
6
WARNING 6
Use only feeders, labeled as shown above, when feed-
ing capacitors based on metal-powder (e.g. tantalum). 6
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis