00193802-01.pdf - 第17页

User Manual SIPLAC E CF 1 Introduction Software version SR.101.xx 06/2003 US Edition 1.4 Liability of t he manufacturer/supplier 17 1.4 Liability of the manufacturer/supplier We draw your att ention to the fact t hat thi…

1 Introduction User Manual SIPLACE CF

1.3 Danger notes Software version SR.101.xx 06/2003 US Edition

1.2.3 User classification

The operating software is structured so that certain functions or menus can only by used or called

by appropriately trained personnel. There are three different classes of user: 1

– operator,

– line engineer and

– service engineer.

Access to each class may be password-protected. Chapters containing information for user

classes higher than "operator" contain a reference to the user class concerned in the footer. 1

Operators 1

The operator class consists of any person who has been trained in operation of the machine.

These people are authorized to use any functions associated with operating the machine and may

call up any menus needed to use the machine. 1

Line engineers 1

Line engineers have undergone special training and are authorized to carry out line engineer ac-

tivities, such as creating set-up configurations, determining vision parameters, etc. 1

Service engineers 1

This class is intended for engineers from SIEMENSDEMATIC AG. They are trained to carry out

servicing work and to upgrade and retrofit the placement system. 1

1.3 Danger notes

WARNING 1

– A thorough knowledge of the relevant part of this User Manual is required before carrying out

any work on the machine.

– All work must be carried out by appropriately trained and qualified personnel.

– All warning, caution and danger notes MUST be observed.

– In addition, read through chapter 2 of the user manual carefully.

User Manual SIPLACE CF 1 Introduction

Software version SR.101.xx 06/2003 US Edition 1.4 Liability of the manufacturer/supplier

1.4 Liability of the manufacturer/supplier

We draw your attention to the fact that this user manual only contains descriptive and explanatory

material and does not include any contractual conditions or undertakings. All obligations of Sie-

mens Dematic AG proceed from the conclusion of the contract concerned, under which you have

the machine described herein. This applies in particular to all statements regarding performance

or service life and the agreed liability for faults or defects. The provisions of the contract regarding

the liability for faults or defect are neither extended nor restricted by any statements in this user

manual.. 1

1.5 EU-Declaration of Conformity

The product/device described below 1

product: Automatic Placement SystemSIPLACE CF

item no.: 374500 1

manufactured by 1

SIEMENSDEMATIC AG

Electronics Assembly Systems

Rupert-Mayer-Str. 44

D-81359 Munich 1

conforms to the relevant provisions of: 1

– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on the

approximation of the laws of the Member States relating to machinery

– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the Mem-

ber States relating to electromagnetic compatibility

The product(s) identified above comply with the requirements of the above EU directive by meet-

ing the following standards: 1

EN 292-1, EN 292-2, EN 294, EN 349, EN 418, EN 811, EN 60204-1, EN 60825-1

BGV A1

, BGV A2

, VBG 5

, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8 1

1. National specifications

This declaration certifies the compliance with the indicated directives but implies no warranty of properties.

The safety instructions of the accompanying product documentation shall be observed.

1 Introduction User Manual SIPLACE CF

1.6 Revision index Software version SR.101.xx 06/2003 US Edition

1.6 Revision index

1.7 Abbreviations

Manual

Software

version

Edition

First edition User Manual SR.101.xx 06/2003 US

CO 1 Component 1

C&P 1 Collect&Place 1

C&P6 1 Collect&Place head with 6 segments 1

DCA 1 Direct Chip Attach 1

FC 1 Flip chip 1

WT 1 Waffle-pack tray 1

WPTC 1 Waffle-pack tray carrier 1

GND 1 Ground 1

IC 1 Integrated circuit 1

PCB 1 Printed circuit board 1

P&P 1 Pick&Place 1

WPC 1 Waffle-pack changer 1