00193802-01.pdf - 第28页

2 Operational safety User Manual SIPLACE CF 2.2 Warning labels Software version SR.101.x x 06/2003 US Edition 28 2.2.1.1 W arnin g label W201 2 Item W201 i n Fig. 2.2 - 2 (number pe r placement system : 1) 2.2.1.2 W arni…

100%1 / 188
User Manual SIPLACE CF 2 Operational safety
Software version SR.101.xx 06/2003 US Edition 2.2 Warning labels
27
2
Fig. 2.2 - 4 Warning labels on the machine - part 4
2
Item W203 part no. 03009342-01
Item W204 part no. 03009343-01
Item W206 part no. 03009345-01
2 Operational safety User Manual SIPLACE CF
2.2 Warning labels Software version SR.101.xx 06/2003 US Edition
28
2.2.1.1 Warning label W201
2
Item W201 in Fig. 2.2 - 2 (number per placement system: 1)
2.2.1.2 Warning label W203
2
Item W203 in the figures 2.2 - 1, 2.2 - 2, 2.2 - 3 and 2.2 - 4 (number per placement system: 4)
2.2.1.3 Warning label W204
2
Item W204 in the figures 2.2 - 1, 2.2 - 2, 2.2 - 3 and 2.2 - 4 (number per placement system: 4)
2
2
2
2
2
2
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends absolutely
on the operator being familiar with the user manual
and safety instructions and putting them into effect.
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the
arms and hands.
Do not reach into the machine while it is run-
ning
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the
arms and hands.
Do not reach into the machine while it is run-
ning
User Manual SIPLACE CF 2 Operational safety
Software version SR.101.xx 06/2003 US Edition 2.2 Warning labels
29
2.2.1.4 Warning label W206
2
Item W206 in the figures 2.2 - 1, 2.2 - 2, 2.2 - 3 and 2.2 - 4 (number per placement system: 8)
2.2.2 Warning label W205
2
Item W205 in Fig. 2.2 - 5 (number per placement system: 8)
WARNING 2
If you wish to do work on the tape cutter, you must disconnect the machine from the mains supply
and the compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
Wear robust protective gloves when working on the tape cutter. 2
2
DANGEROUS VOLTAGES!
The labeled parts are still live when the main power switch is off.
Disconnect the machine from the main power supply before ser-
vicing it!
NAFTA region: RISK OF ELECTRIC SHOCK OR BURN!
2
2
2
RISK OF CUTTING!
Danger of cutting is present even when the ma-
chine is switched off