Specification SIPLACE X-Series S 规格说明书.pdf - 第22页
22 Board conveyor Placement modes Synchronous mode In synchronous mode, two boards are transported in to the placement position at the same time. They are pro- cessed as a common p anel. When using products with greatly …
21
Board conveyor
Technical data
Single conveyor Flexible dual con-
veyor
Dual conveyor in
single conveyor
mode
Board dimensions
(length x width)
a
a) Please observe the max. length of the board of 410 mm when using Smart Pin Support.
X2 S / X3 S / X4 S - standard 50 mm x 50 mm to
450 mm x 685 mm
b
b) Board width up to 560 mm as standard. Board widths up to 685 mm available on request.
50 mm x 50 mm to
450mm x 320mm
50 mm x 50 mm to
450 mm x 600 mm
b
X2 S / X3 S / X4 S - long board
c
c) With input/output conveyor only
50 mm x 50 mm to
850 mm x 685 mm
b
50 mm x 50 mm to
850mm x 320mm
50 mm x 50 mm to
850 mm x 600 mm
b
X4i S - standard 50 mm x 50 mm to
450 mm x 685 mm
b
50 mm x 50 mm to
380 mm x 320 mm
d
d) Full functionality only up to 380 mm x 320 mm. All restrictions relating to other board sizes will automatically be taken
into account by SIPLACE Pro.
50 mm x 50 mm to
450 mm x 600 mm
b
X4i S - long board
c
50 mm x 50 mm to
850 mm x 685 mm
b
50 mm x 50 mm to
760 mm x 320 mm
d
50 mm x 50 mm to
760 mm x 510 mm
d
Stationary conveyor side Right or left Right, left or outer
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 24
PCB weight
e
Standard
e) The board weight value refers to the weight of the board plus the weight of the components.
Max. 3.0 kg
f
f) Standard 3.0 kg. Board weight up to 8.0 kg available on request.
Max. 2.0 kg
g
g) Standard 2.0 kg. Board weight up to 5.0 kg available on request.
Max. 2.0 kg
g
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Single conveyor
Dual conveyor
h
h) 0 seconds in asynchronous mode, otherwise 1.5 seconds.
< 1.5 seconds
0 seconds
Key information for machines in combination with SIPLACE X-Series S:
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series S, be aware that there is limited room between
the two placement machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between
the two machines.
To achieve top placement performance, fit the first placement machine in a SIPLACE X-Series S line with an input conveyor extension
and the last placement machine in the line with an output conveyor extension.
22
Board conveyor
Placement modes
Synchronous mode
In synchronous mode, two
boards are transported into
the placement position at the
same time. They are pro-
cessed as a common panel.
When using products with
greatly differing placement
content, common optimiza-
tion increases the perfor-
mance of the whole content
on both boards.
Asynchronous mode
In asynchronous mode, only
one board is processed on
one of the conveyor lanes. At
the same time, another
board on the second con-
veyor lane is moved into the
placement position. This
saves the full conveying time
of one board, thus consider-
ably increasing performance,
particularly for boards with a
short cycle time.
I-Placement
The SIPLACE line achieves
top placement performance
with the use of I-Placement.
In this mode, the two heads
work simultaneously and
populate the PCB on the cor-
responding conveyor side,
totally independently of one
another. Short distances fur-
ther increase the output.
Borrow Performance.
By facilitating simultaneous
production of two boards with
different contents in one line,
Borrow Performance is the
ideal addition to I-Placement.
In placement machines with
Borrow Performance, both
heads place the same board
in alternation The board in
the other conveyor lane is
simply transported through
the system. This makes it
possible to achieve the same
cycle time for both boards,
despite the different place-
ment contents.
23
Board conveyor
I-Placement
Alternating placement mode
Alternating placement or
I-Placement mode
Distance of outer conveyor
edges: 680 mm, 2 lanes, outer
conveyor edges fixed
Alternating placement mode
Distance of outer conveyor
edges: 601 mm, dual conveyor
in single conveyor mode, right
conveyor edge fixed
a
max. 320
Movable conveyor side
Stationary conveyor side
a) The diagram only shows settings with a fixed righthand conveyor edge. A setting with the stationary conveyor
edge on the left is also possible. All dimensions in millimeters.
max. 320
344
680 (27“)
Min. 35
-344
+258
max. 601
Adjustable conveyor side position and max. PCB width
Conveyor side position Max. PCB width Distance of fixed sides to one another, for various fixed side
position settings
Outside Right or left
234.2 mm 216 mm 468.4 mm 2517 mm
254 mm 236 mm 508 mm 272 mm
259.7 mm 242 mm 519.4 mm 277.2 mm
268 mm 250 mm 536 mm 286 mm
268 mm SMEMA 250 mm 536 mm 285.5 mm
281 mm 260 mm 562 mm 299 mm
281 mm SMEMA 260 mm 562 mm 298.5 mm
320 mm 300 mm 640 mm 337.5 mm
344 mm 320 mm 688 mm 362 mm
Customized Max. 320 mm Max. 688 mm Max. 362 mm