Specification SIPLACE X-Series S 规格说明书.pdf - 第61页
61 List of options A vailable options X2 S X3 S X4 S X4i S Not es Flexible dual con veyor fixed side right XX X X Flexible dual con veyor fixed side left XX X X Long board (LBO) X X X X Thick board X X X X S peedS tar C&…
60
Technical data
Transportation and delivery configuration
Description
Within Europe, the machine
is delivered on a robust
wooden pallet. If sent over-
seas, the machine is pack-
aged in a wooden crate.
Configuration when deliv-
ered
• The dual conveyor has a
preset width for lane 1 of
100mm and for lane 2 of
210mm.
• The monitors have been
dismantled.
• The indicator lamp is dis-
mantled.
Transport dimensions and weight
Means of transport
A fork-lift with the following specification will be needed to carry
the machine in its crate:
Length
Width
Height
2000 mm
2960 mm
1620 mm
Weight Dispatch Dispatch
within Europe overseas
3,859 kg 4,359 kg
Fork length
Lifting power
Clear fork width
Min. 1800 mm
Min. 6000 kg
Min. 350 mm
Attachment point
for the fork-lift
Attachment point
for the fork-lift
61
List of options
Available options X2 S X3 S X4 S X4i S Notes
Flexible dual conveyor
fixed side right
XXXX
Flexible dual conveyor
fixed side left
XXXX
Long board (LBO) X X X X
Thick board X X X X
SpeedStar C&P20 P2 X X X X In the two gantry area, only
available in combination
with a second SpeedStar.
Reconfiguration kit for the SpeedStar C&P20 P2 X X X X
MultiStar CPP X X X X
Reconfiguration kit for the MultiStar CPP X X X X
Stationary component camera, type 33 GigE X X X X For the MultiStar CPP and
placement area 2.
TwinStar X X X X Placement area 2 only for
X4i S.
Reconfiguration kit for the TwinStar X X X X Placement area 2 only for
X4i S.
Stationary component camera, type 25 GigE X X X X For the TwinStar only
Nozzle changer X X X X Depends on placement
head.
Nozzle changer "row 2" X X X X Depends on placement
head.
Component trolley X X X X X
SIPLACE SmartFeeder X, 12 mm to 104 mm X X X X
SIPLACE SmartFeeder Xi, 4 mm, 8 mm and 2x8 mm X X X X
Splice point recognition for X feeder modules X X X X
SIPLACE MeasuringFeeder X X X X X
SIPLACE LDU 2 X X X X X
SIPLACE Glue Feeder X X X X
SIPLACE PowerConnector X X X X X
Mount for additional tape reel X X X X
SIPLACE Smart Pin Support -- X X X
Virtual inkspot handler X X X X
Tape reels, level 2 X X X X
62
List of options
Available options X2 S X3 S X4 S X4i S Notes
Adapter X X X X X Tray Stack Feeder, Road-
runner, S linear vibratory
feeder and Label Presenter
can be configured on a com-
ponent trolley X with this
adapter.
110/208 V conversion kit X X X X
Vacuum pump X X X X For the SpeedStar C&P20
P2 only
2D board barcode readers X X X X
PCB barcode reading with PCB camera X X X X
External pre-setup place X X X X
3D coplanarity sensor X X X X For the TwinHead only
Tray holder for SIPLACE X X X X X Locations 2 and/or 4, not in
combination with the Speed-
Star C&P20 P2.
Wafflepack Changer (WPC) X X X -- Only at location 2, not in
combination with the Speed-
Star C&P20 P2.
Matrix Tray Changer (MTC) X X X -- Only at location 2, not in
combination with the Speed-
Star C&P20 P2.
Service flap X X X X Required in conjunction with
the MTC
JTF-M X X X X Only in connection with the
fixed component table.
Component table, fixed installation X X X X For JTF-M and LDU 2 X.
Input conveyor extension X X X X
Output conveyor extension X X X X
Hand guard for conveyor X X X X
Dummy feeder module X X X X
Barcode-controlled production including
WDTL
XXXX
Whispering Down the Line (WDTL) X X X X
Station-wise download X X X X
Borrow Performance X X X X
Interior lighting X X X X
OSC package X X X X
OnBoard PCB inspection X X X X
15" monitor with keyboard X X X X