Specification E by SIPLACE 规格说明书.pdf - 第19页
19 Component Feeding Component Trolley Component trolley E by SIPLACE The E by SIPLACE compo- nent trolleys are indep endent and easily m aneuverab le modules. The E by SIPLACE machines can accomm odate up to two compone…
18
Virtual Inkspot Handler (VIH)
The virtual inkspot handler
(VIH) allows you to scan in
inkspots from an external
system.
This option can be used for
external systems to define
which panels are to be
produced and which to be
omitted. A panel is a specific
part of a printed circuit
board. This concept is much
more flexible than the
physical inkspot concept.
It can be integrated into the
ongoing production process,
if external systems
individually decide whether
each panel it is in a good or
bad state and whether
additional processing steps
are to be omitted or not.
The boards are typically
measured by the external
system and the information
about which panels are good
or bad is then available.
The use of this information
via VIH offers the benefit that
no physical inkspots need to
be read by the PCB camera.
This improves performance,
particularly for boards with a
large number of panels.
This option can also be used
if the panels do not have
room for a physical inkspot.
Workflow VIH with XML file
Workflow VIH with MES and BoardGateKeeper (BGK)
Process Data Interfaces (PDI)
The process data interface (PDI), which can be addressed via
the OIB interface, enables you to access not only the trace-
ability data of the components placed but also various process
parameters for the component placement. The PDI makes
over 40 process attributes per placement position available,
such as:
• Pickup (actual pick position, pickup location ID)
• Dipping (result, timestamp)
• Vision measuring (result plus camera ID)
• Placement (actual place position, ref. desig., vacuum val-
ues)
The data packages contain the data for each board and stop-
per position.
Each individual data package contains a maximum of 200
placement positions.
19
Component Feeding
Component Trolley
Component trolley
E by SIPLACE
The E by SIPLACE compo-
nent trolleys are independent
and easily maneuverable
modules. The E by SIPLACE
machines can accommodate
up to two component trolleys,
each with 60 tracks. The tape
reels are taken up into the
tape container of the compo-
nent trolley. A cutting device
on the machine automatically
cuts the used tape material.
The component trolleys can
be set up directly on the
machine or at an external
setup area with feeder mod-
ules. The benefits of offline
setup are that the configura-
tions can be prepared with-
out stopping the line. This
allows the setup to be
changed very quickly using
the changeover table princi-
ple. The E by SIPLACE com-
ponent trolleys also support
fast setting up and tearing
down of feeder modules
even during the placement
process.
The component feeders are
at rest during the placement
process - allowing tapes to
be spliced without stopping
the machine.
For safety reasons, unoccu-
pied locations are fitted with
so-called dummy feeder
modules.
Component trolley E by SIPLACE
Tape container
Waste container for remaining empty tape
Changeover table
20
Component Feeding
Component Trolley/Fixed Table
Technical Data
Feeder locations
Changeover table with 60 tracks
Fixed table with 60 tracks
60 feeders with SIPLACE SmartFeeder 8mm E
60 feeders with SIPLACE SmartFeeder 8mm E
Changeover table changeover time < 1 minute
Max. component feeding
E by SIPLACE double sided
E by SIPLACE single sided
120 locations for feeders with SIPLACE SmartFeeder 8mm E
60 locations for feeders with SIPLACE SmartFeeder 8mm E
Feeder module types (E by SIPLACE) SIPLACE SmartFeeder E
SIPLACE StickFeeder E
SIPLACE Component Reject Conveyor E
Label Feeder (OEM Product)
Bowl Feeder (OEM Product)
Manual Tray holder E (Speed)
Manual Tray holder E (Flex)
SIPLACE JTF-MW
SIPLACE LDU E
Feeding capacity
(2 change over tables or 2 fixed tables
on the E by SIPLACE)
120 tape feeder modules, SIPLACE SmartFeeder 8 mm E
60 tape feeder modules, SIPLACE SmartFeeder 2x8 mm E
60 tape feeder modules, SIPLACE SmartFeeder 12 mm E
60 tape feeder modules, SIPLACE SmartFeeder 16 mm E
40 tape feeder modules, SIPLACE SmartFeeder 24 mm E
30 tape feeder modules, SIPLACE SmartFeeder 32 mm E
24 tape feeder modules, SIPLACE SmartFeeder 44 mm E
20 tape feeder modules, SIPLACE SmartFeeder 56 mm E
16 tape feeder modules, SIPLACE SmartFeeder 72 mm E
a
12 tape feeder modules, SIPLACE SmartFeeder 88 mm E
a
a) On request