00195467-01_Installation Manual Setup Center 2.2.pdf - 第30页
SIPLACE Setup Center 2.2 Installation Manual Click on the button firmware download Select the CAN Network an d then click on open 30 of 90
Installation Manual SIPLACE Setup Center 2.2
You will find a control lamp on the front of the device. This will shine when power is
correctly supplied to the device.
5.2.3.4 Firmware download for docking station
This section describes the firmware download on the X-Series docking station with the tool
“Caccia”.
• The required firmware version
• Establish the CAN Bus connection between the X-DS and the download PC.
• Start the tool “Caccia”
29 of 90
-
SIPLACE Setup Center 2.2 Installation Manual
Click on the button firmware download
Select the CAN Network and then click on open
30 of 90
Installation Manual SIPLACE Setup Center 2.2
Enter the CAN ID of the X-DS. The current BIOS and application is displayed.
Load the required firmware
31 of 90
-