00195467-01_Installation Manual Setup Center 2.2.pdf - 第61页
Installation Manual SIPLACE Setup Center 2.2 Step 4 Fill Level Control If the fill level control should be deactivat ed for singl e tracks, activate the checkbox “Running tracks” empty is permitted . After that you can…
SIPLACE Setup Center 2.2 Installation Manual
Step 3 Configuration of the Splice detection
Note
This dialog will not appear for the X2, X3 and X4 Machines!
Select the checkbox Splice detection existing, if a splice detection is available.
Enter the COM Port where Splice detection is plugged in or leave empty the entry field.
Click Next to continue.
60 of 90
Installation Manual SIPLACE Setup Center 2.2
Step 4 Fill Level Control
If the fill level control should be deactivated for single tracks, activate the checkbox “Running
tracks” empty is permitted. After that you can let single tracks go empty consciously.
Click Next to continue.
61 of 90
-
SIPLACE Setup Center 2.2 Installation Manual
Step 5 Activation of locked tracks
Choose Activation without barcode reading, you can activate the locked tracks on the
machine GUI, by clicking on the button chosen track in the overview of the empty feeders.
If the checkbox is not selected, you can activate the locked tracks only by scanning the
barcode of packaging unit again.
Click Next to continue.
62 of 90