00195467-01_Installation Manual Setup Center 2.2.pdf - 第42页
SIPLACE Setup Center 2.2 Installation Manual Step 3 Enter the information required to be connected with the SQL Server and d atabase in the "Select SQL-Server" dialog box. Figure 5-9 "Select SQL-Server&q…
Installation Manual SIPLACE Setup Center 2.2
Step 2
The installation detects the existing SPI version and installs the according SIPLACE Setup Center
files.
In case no SPI is detected, a warning message is displayed.
After this the installation prompts to select a SIPLACE Pro version. SIPLACE Setup Center will be
installed with the files to support the selected SIPLACE Pro version.
Figure 5-8 "Setup Type" dialog box
Select the SIPLACE PRO version
Click Next.
41 of 90
-
SIPLACE Setup Center 2.2 Installation Manual
Step 3
Enter the information required to be connected with the SQL Server and database in the
"Select SQL-Server" dialog box.
Figure 5-9 "Select SQL-Server" dialog box
4
Enter the "Password for the SQL Server user "sa", i.e. the SQL server system administrator.
Note
This password is empty if MSDE/SQL Server has been freshly installed. In this
case, erase the displayed default password. Subsequently, a window will open,
prompting you to change this password. You may accept the Siemens Service
default password or choose one of your own.
Choose your Another Computer from the pull-down menu to show other computer.
Choose your SQL Server Instance from the pull-down menu.
Click Next.
42 of 90
Installation Manual SIPLACE Setup Center 2.2
Step 3
The "Start Copying Files" dialog box gives you a chance to check the information again,
which you have entered during the previous steps. 4
Figure 5-10 The "Start Copying Files" dialog box
4
Click Next if you accept all the information entered so far.
If you want to alter one or more details, click the Back button until you get back to the dialog
box in question.
There, enter your changes and click Next to continue as usual.
43 of 90
-