00195467-01_Installation Manual Setup Center 2.2.pdf - 第72页

SIPLACE Setup Center 2.2 Installation Manual 5.4.3.2 Setting of the scanner address Each scanner requires a unique address.  Enter the following barcode and scan the four digi ts for the scan ner address, e.g . ‘0’ ‘0’ …

100%1 / 90
Installation Manual SIPLACE Setup Center 2.2
1
9
Two-Ways
Display-off Timeout
9
0
71 of 90
-
SIPLACE Setup Center 2.2 Installation Manual
5.4.3.2 Setting of the scanner address
Each scanner requires a unique address.
Enter the following barcode and scan the four digits for the scanner address, e.g. ‘0’ ‘0’ ‘0’ ‘1’.
Note
The address must consist of four digits. Don’t forget to enter heading zeros.
Set Radio Address
Four digits for the DRAGON ™ M Address (from 0000 to 1999).
72 of 90
Installation Manual SIPLACE Setup Center 2.2
Barcode Type Code 93
Exit and Save configuration
Aiming pointer (standard is 300 ms). The aiming pointer holds the laser beam on a single spot
before reading a barcode.
300ms 500ms
1 sec
Aiming system disabled
The scanner is now ready configured. Now it needs to be bound to a RF station as described
below.
73 of 90
-