00195467-01_Installation Manual Setup Center 2.2.pdf - 第63页
Installation Manual SIPLACE Setup Center 2.2 Step 6 Setup verification system NOTE This Dialog will only appear for the machi ne with the station-software version 408! The station software version 408 offers two di f…
SIPLACE Setup Center 2.2 Installation Manual
Step 5 Activation of locked tracks
Choose Activation without barcode reading, you can activate the locked tracks on the
machine GUI, by clicking on the button chosen track in the overview of the empty feeders.
If the checkbox is not selected, you can activate the locked tracks only by scanning the
barcode of packaging unit again.
Click Next to continue.
62 of 90
Installation Manual SIPLACE Setup Center 2.2
Step 6 Setup verification system
NOTE
This Dialog will only appear for the machine with the station-software version
408!
The station software version 408 offers two different interfaces to the Setup verification
system. By choosing the corresponding Setup verification system the interface will be
configured in the station-software accordingly.
Click Next to continue.
63 of 90
-
SIPLACE Setup Center 2.2 Installation Manual
Step 7 Traceability
Note:
Traceability settings can only be changed, if the Tractability Option is installed at
the station.
Here you can choose whether the Traceability Data should be created.
Furthermore you can select the File version 1.0 for standard TRC file or the File version 2.0
for extended TRC file.
Click Next to continue. Wait until the next dialog box appears. It can be take a few minutes.
64 of 90