00197623-03_VD_708.1_SP2_DE_EN.pdf - 第19页
Station Software 7 08.1 SP2 / Version Description Ausgabe 10/2015 E dition 19 6 Hardware S pecifications 6.1 Supported F eeder T ype s The following f eeders are supported by the 70 8.1 SP2 stati on software versio n: – …
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
18
5.13 Enhancements in SIPLACE Vision
The SIPLACE Vision system has been enhanced as follows:
– Displaying a virtual keyboard
Compatible mode: Compatible
SIPLACE Vision automatically displays a virtual keyboard on the GUI of the station software
whenever a text entry field has been selected. This behavior has to be configured in the station
software beforehand.
The virtual keyboard is not displayed on the GUI of the Vision Teach Station because a
keyboard is always available in this case.
– Modifications to allow reading of individual barcode fiducials by the board camera.
Compatible mode: Complete
– Improved procedure to teach the pickup position if the camera is outside the travel range due to
a slight rotation.
Compatible mode: Compatible
– If connection problems occur in the communication with the GigE cameras, the errors are
narrowed down by specific queries and detailed error messages displayed.
Compatible mode: Complete
– Correction in the calculation of the scaling of MFU components.
Compatible mode: Complete
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
19
6 Hardware Specifications
6.1 Supported Feeder Types
The following feeders are supported by the 708.1 SP2 station software version:
– 4 mm – 104 mm X-feeder
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– SIPLACE Glue Feeder
– TrayStack Feeder AX (X4i S on location 2 and 3 only)
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– Arbitrary Carrier X (X-series only)
– Conveyor Carrier X (X-series only)
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– FFI feeders:
HanSan LED feeder
Top Engineering LED feeder
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE multi stick 60 AX
IPTE multi stick XL80 AX
– Stick feeder with X-adapter
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Dip module for X-tables (LDU_X)
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5/WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
– Splice sensor X-feeder
6.2 Camera Systems and Component Ranges
Detailed information about the used camera systems and component ranges for the placement
heads can be found in the respective machine specifications and/or User Manuals of the placement
machines.
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
20
7 SIPLACE Software Environment
7.1 SIPLACE Pro Programming System Version 12.1
The SIPLACE Pro programming system version 12.1 supports the SIPLACE X-series, X-series S,
SX-series, DX-series and CA-series placement machines with the 708.1 station software version.
Compatible mode: SIPLACE Pro 11.x
NOTICE
For a detailed description of the programming system, see the SIPLACE Pro version
description and the online help system.
7.2 SIPLACE OIS Version 12.1
Software version 12.1 of the monitoring system SIPLACE OIS supports the SIPLACE X-series,
X-series S, SX-series, DX-series and CA-series placement machines.
Compatible mode: SIPLACE OIS 11.x
NOTICE
A detailed description can be found in the software description "Getting started with OIS"
and the online help system for OIS.
7.3 SIPLACE Setup Center Version 7.1
Software version 7.1 of the SIPLACE Setup Center supports the SIPLACE X-series, X-series S,
SX-series, DX-series and CA-series placement machines.
Compatible mode: SIPLACE Setup Center 6.x
NOTICE
A detailed description can be found in the software description "Getting started with
Setup Center" and the online help system for Setup Center.
7.4 SIPLACE Traceability Version 4.1 SP1
Software version 4.1 of SIPLACE Traceability supports the SIPLACE X-series, X-series S,
SX-series, DX-series and CA-series placement machines.
Compatible mode: SIPLACE Traceability 3.6
NOTICE
A detailed description can be found in the "Traceability User Guide".