00197623-03_VD_708.1_SP2_DE_EN.pdf - 第41页

Station Software 7 08.1 SP2 / Version Description Ausgabe 10/2015 E dition 41 10 Important T erms and A bbreviations ACT Accuracy Check T ool CA 4 Machine type of the Chip Assembly ( CA) - series w ith 4 gantries CA4 eWL…

100%1 / 92
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
40
D17843-2007 GUI freezed and hung up.
D17935-201
When the LBO option was used on an SIPLACE X3 placement machine, two
placement positions were omitted automatically. This was caused by a very
high component.
Table 8-3: Corrected errors 708.1 station software version
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
41
10 Important Terms and Abbreviations
ACT Accuracy Check Tool
CA4 Machine type of the Chip Assembly (CA)-series with 4 gantries
CA4 eWLP Machine type of the Chip Assembly (CA)-series with 4 gantries
and WLFO (customer project, no release for series production)
C&P Collect & Place
CPP Collect & Place & Pick & Place
DC Dual Conveyor
DX1/DX2 Machine type with 1 or 2 gantries
DX4 Machine type with 4 gantries
EDIF Electronic Design Interchange Format
eWLP embedded Wafer Level Process
FCCS Field Camera Calibration System
GCU Gantry Control Unit (new electronic concept for X4i)
GUI Graphical User Interface
HCU Head Control Unit (new electronic concept for X4i)
HFH High Force Head
HW Hardware
MTC Matrix Tray Changer
OIS Operator Information System
PA Processing area
PCB Printed circuit board
SC Single Conveyor
SC SIPLACE Setup Center (external setup control system)
SW Software
SWS SIPLACE Wafer System
SX1/SX2 Machine type with 1 or 2 gantries
SX3 Machine type with 3 gantries
SX4 Machine type with 4 gantries
TH Twin Head
TH HF Twin Head High Force
Twin VHF Very High Force Twin Head
VC Vision computer
VCU Vision Control Unit
VHF P&P Very High Force Pick&Place
WLFO Wafer Level Fan-Out, Chip Assembly process
WPC Waffle Pack Changer
X2/X2 S Machine type with 2 gantries
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
42
X3/X3 S Machine types with 3 gantries
X4/X4 S/
X4i S micron
Machine types with 4 gantries
X4i/X4i S
X4i S micron
Machine types with 4 gantries