00193161-01.pdf - 第52页
Placement of 0 402 components Manual S-20/S-23 HM/S-25 HM/F4/F5 HM/HS-50 03/2001 edition 52 5.3.3 Pos itioning the 0402 sp acer on the two-sided hold- down device Fig. 5 - 7 Positioning the 0402 spacer on t he two-sided …
Manual S-20/S-23 HM/S-25 HM/F4/F5 HM/HS-50 Placement of 0402 components
03/2001 edition
51
5.3.2 Positioning the 0402 tape spacer (2 x 8 mm SII feeder)
The position of the tape spacer depends on which version of the hold-down device is used. There
are one-sided or two-sided hold-down devices.
Fig. 5 - 6 Replacing the component cover, removing the foil removal beak
a &RPSRQHQWFRYHU
s 7ZRVLGHGKROGGRZQGHYLFH
Placement of 0402 components Manual S-20/S-23 HM/S-25 HM/F4/F5 HM/HS-50
03/2001 edition
52
5.3.3 Positioning the 0402 spacer on the two-sided hold-down device
Fig. 5 - 7 Positioning the 0402 spacer on the two-sided hold-down device
a VSDFHU
s &RPSRQHQWFRYHU
– Insert the 0402 spacer (item a in Fig. 5 - 7
) so that it is level with the component cover (item
s in Fig. 5 - 7
) in the tape channel of the feeder module.
– Position the 0402 spacer so that the notch in the center (item in Fig.
5 - 7
) is flush with the saw-toothed recess (item in Fig. 5 - 7) in the component cover.
A
B
Manual S-20/S-23 HM/S-25 HM/F4/F5 HM/HS-50 Placement of 0402 components
03/2001 edition
53
5.3.4 Positioning the 0402 spacer on the one-sided hold-down device
Fig. 5 - 8 Positioning the 0402 spacer on the one-sided hold-down device
a VSDFHU
s &RPSRQHQWFRYHU
– Insert the 0402 spacer (item a in Fig. 5 - 8
) so that it is level with the component cover (item
s in Fig. 5 - 8
) in the tape channel of the feeder module.
– Position the 0402 spacer so that the edge (item in Fig 5 - 8
) is flush with the saw-toothed
recess (item in Fig. 5 - 8
) in the component cover.
A
B